姓    名 :

郭昌宏 (Chang-Hung Kuo)

職    稱 :

土木系教授

分    機 :

4954

信    箱 :

This email address is being protected from spambots. You need JavaScript enabled to view it.

Additional Info

  • 現職:

  • 連繫:
    • Tel:886-49-2910960 ext 4954
    • Fax:886-49-2918135
    • This email address is being protected from spambots. You need JavaScript enabled to view it.
    • http://amd.ce.ncnu.edu.tw


  • 學歷:
    • Ph.D., Northwestern University, 1992
    • M.S., National Taiwan University, 1987
    • B.S., National Cheng Kung University, 1982


  • 經歷:
    • Professor, National Chi Nan University, 2014-present
    • Associate Professor, National Chi Nan University, 1998-2014
    • Chairman, Dept. of Applied Materials and Optoelectronic Engineering, 2009-2010
    • Library Director, National Chi Nan University, 2000-2004
    • Member of Technical Staff, Rockwell Science Center (Teledyne Scientific & Imaging, LLC), 1997-1998
    • Research Associate, Center for Engineering Tribology, Northwestern University 1993-1997


  • 教學:
    • Advanced Engineering Mathematics (I)
    • Statics & Dynamics
    • Elasticity
    • Numerical Analysis
    • Dynamics of Structures
    • Finite Element Method
    • Advanced Finite Element
    • Computation Materials Science
    • Mechanical Behavior of Materials
    • Micromechanics


  • 研究興趣:
    • Computational Mechanics, Tribology, Micromechanics, Computer Modeling of Materials


  • 榮譽:
    • Marquis Who'sWho in the World, 2010-2015
    • Marquis Who'sWho in Science and Engineering, 2011-2012
    • Marquis Who'sWho in Asia, 2012
    • 國立暨南國際大學教學貢獻獎,101學年度
    • 傑出教學助理指導教師 (靜力學),101學年度
    • 人才培育、研究團隊建立及服務方面的重要貢獻及成就
    • 林祺惠(專題生):參加第二屆中華顧問工程司舉辦的「工程力學研習營」,2011榮獲個人獎第一名(全國取6名)
    • 紀佩瑩(專題生):參加第三屆中華顧問工程司舉辦的「工程力學研習營」,2012榮獲個人獎
    • (不公佈名次,全國取6名)
    • 林佳樺(專題生):參加第四屆中華顧問工程司舉辦的
    • 「工程力學研習營」,2013榮獲個人獎
    • (不公佈名次,全國取8名)
    • 林祺惠:國立暨南國際大學科技學院學士班專題競賽佳作獎,2012
    • 紀佩瑩:國立暨南國際大學科技學院學士班專題競賽優等獎,2013


  • 重要貢獻及成就:

  • 碩士生:
    • 林祺惠:應用邊界元素法於微動接觸應力分析(2015)
    • 何泓儒:鍍膜在循環接觸應力作用下之抗磨耗機制研(2015)
    • 陳品良:非牛頓流體之彈液動線接觸潤滑分析(2014)
    • 李泰億:正齒輪之接觸應力分析(2013)
    • 曹心瑜:含異質材料接觸應力分析(2012)
    • 林敬淶:平行化分子動力模擬應用於奈米壓痕試驗(2009)
    • 林秀芬:結構鋼材在循環載重下之彈塑性行為研究(2008)
    • 張譯文:單晶體銅奈米壓痕試驗之分子動力模擬(2007)
    • 許志義:薄膜壓痕試驗之有限元素分析(2005)
    • 陳世育:複合材料應用於鋼筋混凝土結構補強之有限元素分析(2004)


  • 博士生:

  • 國內研討會:
    • (1) "Interpretation of Coseismic Surface Deformation Data Using Three Dimensional Crack (Stress Drop) Models," NSF/USGS Workshop on Crustal Deformation Measurement and Earthquake Mechanics, March 18-22 1990, Monterey, CA.
    • (2) "Modeling of Coseismic Surface Deformation Using Non-Kinematic Approach," the 85th Annual Meeting of the Seismological Society of America, May 2-4 1990, Santa Cruzm, CA.
    • (3) "Cracking in a Loaded, Brittle Elastic Half-Space," George Hermann Anniversary Symposium, March 1991, San Diego.
    • (4) "Contact Stress Analysis of a Layered Transversely Isotropic Half-Space," 1991 ASME/STLE Tribology Conference.
    • (5) "Three-Dimensional Analysis of Cracking in a Multi-Layered Composite," 1993 ASME-EMD Meeting.
    • (6) "Effect of Mulctiple Cracking on Crack Growth and Coalescence in Contact Fatigue," 1996 ASME/STLE Tribology Conference.
    • (7) "Recent Development on Contact Faitgue Life Prediction in Gears," GM Gear Center Workshop, October 1996, Detroit, MI.
    • (8) C.-H. Kuo, "A Boundary Element Method for the Three-Dimensional Fracture Analysis of Multiple Cracking in Structural Materials," 八十八年「電子計算機於土木水利工程應用」研討會
    • (9) C.-H. Kuo, "Three-Dimensional Contact Stress Analysis of Engineered Surfaces with Measured Roughness, 九十二年中國機械工程學會第二十屆全國學術研討會
    • (10) 陳世育, 郭昌宏, "複合材料應用於鋼筋混凝土結構補強之有限元素分析," 九十四年電子計算機於土木水利工程應用研討會
    • (11) 許志義, 郭昌宏, "薄膜壓痕試驗之有限元素分析," 九十四年第二屆磨潤暨材料科技研討會
    • (12) 許志義, 郭昌宏, "應用三維有限元素模型分析薄膜壓痕量測試驗", 九十四年中國機械工程學會第二十二屆全國學術研討會
    • (13) 張譯文, 郭昌宏, "單晶體銅奈米壓痕試驗之分子動力模擬", 九十五年中國機械工程學會第二十三屆全國學術研討會
    • (14) 林秀芬, 郭昌宏, "非線性硬化材料之彈塑性滾滑動接觸分析", 九十七年中國機械工程學會第二十五屆全國學術研討會
    • (15) 林敬淶, 郭昌宏, "分子動力模擬探討壓痕深度與探針尖端半徑對於奈米壓痕試驗結果之影響", 九十七年中國機械工程學會第二十五屆全國學術研討會
    • (16) 郭昌宏,“邊界元素法應用於接觸問題分析,” The Third Workshop on Boundary Element Methods, Integral Equations and Related Topics in Taiwan, 2012
    • (17) C.-H. Kuo,“Analytical Modeling of Reciprocating Contacts due to Fretting,”1st Conference on Tribology Technology of Taiwan and Competition on Surface Engineering Application, 2013.
    • (18) 林祺惠、何泓儒、郭昌宏*、林仁輝, “水平軸風力發電機塔柱結構振動分析,” 一百零二年中國機械工程學會第三十屆全國學術研討會
    • (19) 何泓儒、林祺惠、郭昌宏*、林仁輝, “風力發電機葉片應力分析,” 一百零二年中國機械工程學會第三十屆全國學術研討會
    • (20) 陳品良、郭昌宏*, “線接觸彈液動潤滑分析,” 一百零二年中國機械工程學會第三十屆全國學術研討會
    • (21) C.-H. Kuo, “Elastic-Plastic Analysis of Fretting Contacts,” 2014 International Conference on Engineering Tribology Technology.


  • 國外研討會:

  • 國內論文發表:

  • 國外論文發表:

  • 期刊:
    • (1) M. Wu, J. W. Rudnicki, C. H. Kuo and L. M. Keer, "Surface Deformation and Energy Release Rates for Constant Stress Drop Slip Zones in an Elastic Half-Space," Journal of Geophysical Research, 16,509-16,524, Vol. 96, 1991.
    • (2) W. Lin, C. H. Kuo and L. M. Keer, "Analysis of a Transversely Isotropic Halfspace under Normal and Tangential Loadings," ASME Journal of Tribology, 335-338, Vol. 113, 1991.
    • (3) L.M. Keer and C. H. Kuo, "Cracking in a Loaded, Brittle Elastic Half-Space," International Journal of Solids and Structures, 1819-1826, Vol. 29, 1992.
    • (4) C.H. Kuo and L. M. Keer, "Contact Stress Analysis of a Layered Transversely Isotropic Half-Space," ASME Journal of Tribology, 253-262, Vol. 114, 1992.
    • (5) C.H. Kuo, L. M. Keer and R. K. Steele, "Simulation of the Vertical Split Head Failure in Rails," International Journal of Solids and Structures, 2177-2197, Vol. 30, 1993.
    • (6) C.H. Kuo and L. M. Keer, "Contact Stress and Fracture Analysis of Articular Cartilage," Biomedical Engineering, 53-59, Vol. 5, 1993.
    • (7) C.H. Kuo, L. M. Keer and R. D. Cordes,"A Note on Line Spring Solutions for a Part-Through Crack," International Journal of Fracture, 1191-195, Vol.72, 1995.
    • (8) C.H. Kuo and L. M. Keer, "Three-Dimensional Analysis of Cracking in a Multi-Layered Composite," ASME Journal of Applied Mechanics, 273-281, Vol. 62,1995.
    • (9) C.H. Kuo, L. M. Keer and M. P. Bujold, "Effects of Multiple Cracking on Crack Growth and Coalescence in Contact Fatigue," ASME Journal of Tribology,385-390, Vol. 119, 1997.
    • (10) C.H. Kuo, "Mechanics of Contact Fatigue," 專題報導,中華民國力學學會會訊,第九十九期,中華民國九十一年八月
    • (11) C.H. Kuo, "Stress Disturbances Caused by the Inhomogeneity in an Elastic Half-Space Subjected to Contact Loading," International Journal of Solids and Structures, 860-873, Vol. 44, 2007. (2007 I.F=1.569, Mechanics Rank=15/112)
    • (12) C.H. Kuo, "Contact Stress Analysis of an Elastic Half-Plane Containing Multiple Inclusions," International Journal of Solids and Structures 45 4562-4573, 2008. (2008 I.F=1.809, Mechancis Rank=20/112)
    • (13) C.H. Kuo, "Boundary element methods for contact analysis,"(invited), Encyclopedia of Tribology, Springer, 2013.
    • (14) C.H. Kuo, "Elastic field due to an edge dislocation in a multilayered composite," International Journal of Solids and Structures 51, 1421-1433, 2014.
    • (15) C.H. Kuo, "Elastic-Plastic Analysis of Fretting Contacts," Key Engineering Materials, 248-252, Vol. 642, 2015.


  • 專利發表:

  • 技術轉移:

  • 科技部計畫(含大專生研究計畫):

  • 其它委辦計畫:

  • 研發作品及相關發表:

Go to top