姓    名 :

李文娟 (Ven-Gen Lee)

職    稱 :

土木系教授

分    機 :

4952

信    箱 :

This email address is being protected from spambots. You need JavaScript enabled to view it.

Additional Info

  • 現職:
    • Professor in
    • Department of Civil Engineering
    • National Chi Nan University, Taiwan


  • 連繫:
    • Tel:(049) 2910-960 ext. 4952 
    • Fax:(049) 2918-679
    • This email address is being protected from spambots. You need JavaScript enabled to view it.
    • http://amd.ce.ncnu.edu.tw


  • 學歷:
    • Ph.D., Northwestern University (USA), 1993
    • B.S., National Taiwan University, 1988


  • 經歷:
    • Professor, Dept. of Civil Eng., National Chi Nan University, 2013-present
    • Associate Professor, Dept. of Civil Eng., National Chi Nan University, 2003-2013
    • Assistant Professor, Dept. of Civil Eng., National Chi Nan University,1997-2003
    • Research Associate, Dept. of Civil and Materials Eng., University of Illinois at Chicago, 1993-1996
    • Research Assistant, Theoretical and Applied Mechanics Program, Northwestern University, 1989-1993
    • Research Assistant, Structural Mechanics Lab, National Taiwan University, 1988-1989


  • 教學:
    • Mechanics of Materials
    • Advanced Mechanics of Materials
    • Lab for Civil Engineering 
    • Advanced Engineering Mathematics (I & II)
    • Engineering Materials
    • Mechanics of Composites
    • Mechanical Behavior of Materials
    • Micromechanics
    • Calculus


  • 研究興趣:
    • Micromechanics, Ceramics Processing, Failure Analysis of Materials, Anisotropic Elasticity, Mechanics of Composites, Smart materials and Structures


  • 榮譽:
    • Marquis Who'sWho in Science and Engineering, 2003-2007
    • 教學貢獻獎,97學年度
    • 優良教學助理指導教師(土木工程實驗一),97學年度
    • 獎勵卓越教學傑出教學助理指導教師獎(材料力學),99學年度
    • 教學卓越計劃優良教學助理指導教師(材料力學),98、101學年度
    • 人才培育、研究團隊建立及服務方面的重要貢獻及成就
    • 鄭之浩:參加第一屆中華顧問工程司舉辦的「工程力學研習營」,2010榮獲個人獎(全國取6名)
    • 蔡育霖:國立暨南國際大學科技學院學士班專題競賽佳作獎,2006
    • 鄭之浩:國立暨南國際大學科技學院學士班專題競賽優等獎,2011
    • 張鐘鳴:國立暨南國際大學科技學院學士班專題競賽佳作獎,2013
    • 鄧佑任、張辰暘:國立暨南國際大學科技學院學士班專題競賽佳作獎,2014


  • 重要貢獻及成就:

  • 碩士生:
    • 許緄驛:利用筊白筍殼製作隔熱磚材研究(2014)
    • 蕭潤身:添加劑對氧化鋁陶瓷材料機械性質及孔隙度影響之研究(2009)
    • 劉家瑋:含壓電致動器複合疊層之控制分析(2005)


  • 博士生:

  • 國內研討會:
    • (1) 許緄驛、李文娟,2014,利用筊白筍殼製作隔熱磚材之研究,中華民國第十二屆結構工程暨第二屆地震工程研討會, 8 月 27 - 29 日,高雄國賓飯店。
    • (2) 許緄驛、李文娟,2013,利用筊白筍殼製作隔熱磚材之可行性研究,中華民國中國鑛冶工程學會102年年會暨研討會,10月25日,苗栗台灣中油公司探採研究所。
    • (3) 張鐘鳴、李文娟,2013,磚顏色變化機制之研究,中華民國中國鑛冶工程學會102年年會暨研討會,10月25日,苗栗台灣中油公司探採研究所。
    • (4) 何宗霖、李文娟,2012,添加矽藻土對黏土陶瓷磚材熱傳導性質之影響,中華民國第十一屆結構工程研討會,9月5-7日,台中長榮桂冠酒店。
    • (5) 鄭之浩、李文娟,2011,使用稻殼製造節能磚材之可行性研究,Conference on Resources Engineering 2011, July, 21-22, 2011, NCKU, Tainan, Taiwan,Paper Number:RR-15。
    • (6) Lee, Ven-Gen, Cheng, Chih-Hao, 2011, Effect of rice husk on the thermal conductivity of clay-based ceramic materials, 中國材料科學學會-IUMRS ICA 2011暨100 年年會,Paper Number:1241
    • (7) Lee, Ven-Gen, Dai, Chong-Jie, Development and characterization of a translucent clay-based ceramic material, 中國材料科學學會-IUMRS ICA 2011暨100年年會, Paper Number:1248
    • (8) 董立瑩、李文娟,2010,添加菫青石及蛭石對黏土陶瓷熱傳導性質影響之比較,中華民國九十九年材料科學學會年會,論文編號:01-0680。(NSC 98-2221- E-260-033)
    • (9) 何宗霖、李文娟,2010,添加沸石粉對黏土陶瓷材料熱傳導性質之影響,中華民國九十九年材料科學學會年會,論文編號:01-0809。(NSC 98-2221-E-260-033)
    • (10) 楊韙誠、李文娟,2010,添加硅石粉對黏土陶瓷材料熱傳導性質之影響,中華民國九十九年材料科學學會年會,論文編號:01-0831(NSC 98-2221-E-260-033)
    • (11) 蕭潤身,李文娟,2009,添加氧化物之氧化鋁陶瓷性質研究,中華民國九十八年第四屆資源工程研討會。(NSC 97-2221-E-260-020)
    • (12) 蕭潤身,李文娟,2009,添加劑對氧化鋁陶瓷微觀結構之影響,中國機械工程學會第二十六屆全國學術研討會。(NSC 97-2221-E-260-020)
    • (13) 蕭潤身、李文娟,2008,添加助熔劑對氧化鋁陶瓷機械性質之影響,97年中華民國材料科學學會年會,97年11月21-22日
    • (14) 蔡育霖、李文娟,“燒結行為對黏土陶瓷材料機械性質之影響”,中華民國力學學會第三十屆全國力學會議,95年12月15-16日
    • (15) 蔡育霖、葉丁豪、李文娟,“添加白雲石天然石材製成透水舖面材料研究”, 中華民國第八屆結構工程研討會,95年9月1-3日。
    • (16) V.G. Lee, 2002, "Boussinesq Problem in Three-Dimensional Anisotropic Elasticity," Fourteenth U.S. National Congress of Theoretical and Applied Mechanics, June 23-28, 2002, Blacksburg, Virginia, USA.
    • (17)V.G. Lee, 2001,“Further Discussion on the Elastic Green’s Function for Anisotropic Cubic Materials,”The Fourth Pacific International Conference on Aerospace Science and Technology (PICAST 4), May 21-23, 2001, Taiwan.
    • (18)V.G. Lee, “Stress Concentration Effects in Anisotropic Materials,”中國機械工程學會第十六屆全國學術研討會,Session:疲勞與破壞,會議主持人及論文發表,1999,新竹清華大學。
    • (19)V.G. Lee, T. Mura, "Load Transfer from a Finite Cylindrical Fiber into an Elastic Half-Space," ASME International Mechanical Engineering Congress and Exposition, November 6-11, 1994, Chicago, Illinois, U.S.A.
    • (20)V.G. Lee, T. Mura,“The Elastic Field due to a Cylindrical Inclusion,” ASME Winter Annual Meeting, November 8-13, 1992, Anaheim, California, U.S.A.
    • (21)H. Hasegawa, V.G. Lee, T. Mura,“The Elastic Field due to a Cylindrical Inclusion,” ASME Winter Annual Meeting, December 1-6, 1991, Atlanta, Georgia, U.S.A.


  • 國外研討會:

  • 國內論文發表:

  • 國外論文發表:

  • 期刊:
    • (1) Ven-Gen Lee , 2014, THE THREE-DIMENSIONAL INFINITE SPACE AND HALF-SPACE GREEN’S FUNCTIONS FOR ORTHOTROPIC MATERIALS, Journal of Mechanics, DOI: http://dx.doi.org/10.1017/jmech.2014.36.
    • (2) Ven-Gen Lee , 2013, Superposing scheme for the three-dimensional Green’s functions of an anisotropic half-space, International Journal of Solids and Structures 50, 2407–2415 (SCI, EI)
    • (3) Ven-Gen Lee , 2009, Derivatives of the three-dimensional Green’s functions for anisotropic materials, International Journal of Solids and Structures 46, 3471–3479 (SCI, EI)
    • (4) Ven-Gen Lee , Ting-Hao Yeh, 2008, Sintering effects on the development of mechanical properties of fired clay ceramics, Materials Science and Engineering A 485, 5–13 (SCI, EI)
    • (5) Y. C. Shiah, C. L. Tan and V.G. Lee, 2008, Evaluation of Explicit-form Fundamental Solutions for Displacements and Stresses in 3D Anisotropic Elastic Solids, Computer Modelling in Engineering & Sciences, vol.34, no.3, 205-226 (SCI, EI)
    • (6) V.G. Lee, 2004,“Applications of Stroh Formalism in Anisotropic Elasticity,”(Invited paper) Journal of the Institute of Civil and Hydraulic Engineering, Special Issue, pp. 805-813.
    • (7) V.G. Lee, 2003, “The Extension of Stroh Formalism to Three-Dimensional Anisotropic Elasticity,”(Invited paper) The Chinese Journal of Mechanics, Series A, Vol. 19, pp. 61-68. (EI, SCI Expanded)
    • (8) V.G. Lee, 2003,“Explicit Expression of Derivatives of Elastic Green’s Functions for General Anisotropic Materials,” Mechanics Research Communications, Vol. 30, pp. 241-249. (EI, SCI)
    • (9) V.G. Lee, 2002,“Evaluation of the Three-Dimensional Elastic Green\'s Function in Anisotropic Cubic Media,” International Journal of Engineering Science, Vol. 40, pp.1349-1361. (EI, SCI)
    • (10)T.C.T. Ting and V.G. Lee, 1997,“The Three-Dimensional Elastostatic Green’s Function for General Anisotropic Linear Elastic Solids,” Quarterly Journal of Mechanics and Applied Mathematics, Vol.50, Pt. 3, 407-426. (EI, SCI)
    • (11)V.G. Lee and T. Mura, 1994,“Load Diffusion and Absorption Problems from a Finite Fiber to Elastic Infinite Matrix,” ASME Journal of Applied Mechanics, Vol.61, 567-574. (EI, SCI)
    • (12)V.G. Lee and T. Mura, 1994,“Load Transfer Problem from a Finite Fiber into an Elastic Semi-Infinite Medium,” ASME Journal of Applied Mechanics, Vol.61, 971-975. (EI, SCI)
    • (13)H. Hasegawa, V.G. Lee and T. Mura, 1993,“Hollow Circular Cylindrical Inclusion at the Surface of a Half Space,”ASME Journal of Applied Mechanics, Vol.60, 33-40. (EI, SCI)
    • (14)H. Hasegawa, V.G. Lee and T. Mura, 1992,“The Stress Fields Caused by a Circular Cylindrical Inclusion,” ASME Journal of Applied Mechanics, Vol.59, S107-S114. (EI, SCI)
    • (15)H. Hasegawa, V.G. Lee and T. Mura, 1992,“Green’s Functions for Axisymmetric Problems of Dissimilar Elastic Solids,”ASME Journal of Applied Mechanics, Vol.59, 312-320. (EI, SCI)

    <ul clas



  • 專利發表:

  • 技術轉移:

  • 科技部計畫(含大專生研究計畫):
    • 三維異向性彈力理論應用於材料缺陷之研究: 1999/08/01~2000/07/31
    • 異向性材料應力集中問題研究(I):2000/08/01~2001/07/31
    • 異向性材料應力集中問題研究(II):2001/08/01~2002/07/31
    • 智慧型壓電材料特性探討及應用之研究(I): 2002/08/01~2003/07/31
    • 材料結晶缺陷模擬與相關力學行為研究:2004/08/01~2005/07/31
    • 材料微觀模擬與相關機械性質研究:2005/08/01-2006/07/31
    • 耐火性能之結構材料製造技術與測試方法研究:2006/08/01-2007/07/31
    • 高性能建築陶瓷材料之製造技術及其透水性質測試:2008/08/01-2009/07/31
    • 多孔建築陶瓷材料之製造及熱傳導性質測試:2009/08/01-2010/10/31
    • 隔熱用結構黏土陶瓷材料之製程與熱傳導及力學性質評估:2010/08/01-2011/07/31
    • 孔洞引起之應力集中對異向性材料力學性質的影響(I):2014/08/01~2015/07/31
    • 實驗評估磚材料於提升建築物熱舒適度之成效(葉乃華): 102-2815-C-260-016-E
    • 添加天然珍珠石製成隔熱磚材之研究(何宗霖): 2010/07/01~2011/02/28
    • 添加白雲石天然石材製成透水舖面材料研究(蔡育霖): 95-2815-C-260-025-E


  • 其它委辦計畫:

  • 研發作品及相關發表:

Go to top