郭昌宏 (Chang-Hung Kuo)

Name：Chang-Hung Kuo

Tel:886-49-2910960 ext 4954

Fax:886-49-2918135

chkuo@ncnu.edu.tw

http://amd.ce.ncnu.edu.tw

Education:

Ph.D., Northwestern University
M.S., National Taiwan University
B.S., National Cheng Kung University

Experiences:

Professor, National Chi Nan University, 2014-present
Associate Professor, National Chi Nan University, 1998-2014
Chairman, Dept. of Applied Materials and Optoelectronic Engineering, 2009-2010
Library Director, National Chi Nan University, 2000-2004
Member of Technical Staff, Rockwell Science Center (Teledyne Scientific & Imaging, LLC), 1997-1998
Research Associate, Center for Engineering Tribology, Northwestern University 1993-1997

Statics
Dynamics
Elasticity
Advanced Engineering Mathematics (I)
Finite Element Method
Advanced Finite Element
Computation Materials Science
Engineering Mathematics (I),(II)
Numerical Analysis
Dynamics of Structures
Mechanical Behavior of Materials
Micromechanics

Computational Mechanics
Tribology
Micromechanics
Metal Fatigue
Computer Modeling of Materials
Dynamics of Structures

Marquis Who's Who in the World, 2010-2015
Marquis Who's Who in Science and Engineering, 2011-2012
Marquis Who's Who in Asia, 2012
NCNU Teaching Contribution Award，2012-2013
Advising professor for outstanding teaching assistant (Statics)，2012- 2013

(1) M. Wu, J. W. Rudnicki, C. H. Kuo and L. M. Keer, "Surface Deformation and Energy Release Rates for Constant Stress Drop Slip Zones in an Elastic Half-Space," Journal of Geophysical Research, 16,509-16,524, Vol. 96, 1991.
(2) W. Lin, C. H. Kuo and L. M. Keer, "Analysis of a Transversely Isotropic Halfspace under Normal and Tangential Loadings," ASME Journal of Tribology, 335-338, Vol. 113, 1991.
(3) L.M. Keer and C. H. Kuo, "Cracking in a Loaded, Brittle Elastic Half-Space," International Journal of Solids and Structures, 1819-1826, Vol. 29, 1992.
(4) C.H. Kuo and L. M. Keer, "Contact Stress Analysis of a Layered Transversely Isotropic Half-Space," ASME Journal of Tribology, 253-262, Vol. 114, 1992.
(5) C.H. Kuo, L. M. Keer and R. K. Steele, "Simulation of the Vertical Split Head Failure in Rails," International Journal of Solids and Structures, 2177-2197, Vol. 30, 1993.
(6) C.H. Kuo and L. M. Keer, "Contact Stress and Fracture Analysis of Articular Cartilage," Biomedical Engineering, 53-59, Vol. 5, 1993.
(7) C.H. Kuo, L. M. Keer and R. D. Cordes,"A Note on Line Spring Solutions for a Part-Through Crack," International Journal of Fracture, 1191-195, Vol.72, 1995.
(8) C.H. Kuo and L. M. Keer, "Three-Dimensional Analysis of Cracking in a Multi-Layered Composite," ASME Journal of Applied Mechanics, 273-281, Vol. 62,1995.
(9) C.H. Kuo, L. M. Keer and M. P. Bujold, "Effects of Multiple Cracking on Crack Growth and Coalescence in Contact Fatigue," ASME Journal of Tribology,385-390, Vol. 119, 1997.
(10) C.H. Kuo, "Mechanics of Contact Fatigue," 專題報導，中華民國力學學會會訊,第九十九期,中華民國九十一年八月
(11) C.H. Kuo, "Stress Disturbances Caused by the Inhomogeneity in an Elastic Half-Space Subjected to Contact Loading," International Journal of Solids and Structures, 860-873, Vol. 44, 2007. (2007 I.F=1.569, Mechanics Rank=15/112)
(12) C.H. Kuo, "Contact Stress Analysis of an Elastic Half-Plane Containing Multiple Inclusions," International Journal of Solids and Structures 45 4562-4573, 2008. (2008 I.F=1.809, Mechancis Rank=20/112)
(13) C.H. Kuo, "Boundary element methods for contact analysis,"(invited), Encyclopedia of Tribology, Springer, 2013.
(14) C.H. Kuo, "Elastic field due to an edge dislocation in a multilayered composite," International Journal of Solids and Structures 51, 1421-1433, 2014. (SCI, 20/137, Mechanics)
(15) C.H. Kuo, "Elastic-Plastic Analysis of Fretting Contacts," Key Engineering Materials, 248-252, Vol. 642, 2015.
(16) S. Kotšmíd, C-H Kuo, P. Beno, “Determination of Critical Load in a Nonuniform Circular Steel Column under the Eccentric Axial Load,” Mathematical Problems in Engineering, 1, 1-9, 2016 (EI).
(17) S. Kotšmíd, C-H Kuo, P. Beňo, “Buckling loads for steel tube with flattened ends,” Archive of Applied Mechanics, 87(6), 949–960, 2017 (SCI, 80/135, Mechanics).
(18) C-H Kuo*, S-F Lim, H-R Ho, “Cyclic Deformation Caused by Repeatedly Contact Loading. Applied Mechanics and Materials,” 883, 8-15, 2018. (EI).
(19) C-H Kuo, “Elasto-Plastic Contact Stress Analysis of Hardened Elements under Repeated Contact Loading,” Key Engineering Materials, 823, 91-96, 2019 (EI).

(1) "Interpretation of Coseismic Surface Deformation Data Using Three Dimensional Crack (Stress Drop) Models," NSF/USGS Workshop on Crustal Deformation Measurement and Earthquake Mechanics, March 18-22 1990, Monterey, CA.
(2) "Modeling of Coseismic Surface Deformation Using Non-Kinematic Approach," the 85th Annual Meeting of the Seismological Society of America, May 2-4 1990, Santa Cruzm, CA.
(3) "Cracking in a Loaded, Brittle Elastic Half-Space," George Hermann Anniversary Symposium, March 1991, San Diego.
(4) "Contact Stress Analysis of a Layered Transversely Isotropic Half-Space," 1991 ASME/STLE Tribology Conference.
(5) "Three-Dimensional Analysis of Cracking in a Multi-Layered Composite," 1993 ASME-EMD Meeting.
(6) "Effect of Mulctiple Cracking on Crack Growth and Coalescence in Contact Fatigue," 1996 ASME/STLE Tribology Conference.
(7) "Recent Development on Contact Faitgue Life Prediction in Gears," GM Gear Center Workshop, October 1996, Detroit, MI.
(8) C.-H. Kuo, "A Boundary Element Method for the Three-Dimensional Fracture Analysis of Multiple Cracking in Structural Materials," 八十八年「電子計算機於土木水利工程應用」研討會
(9) C.-H. Kuo, "Three-Dimensional Contact Stress Analysis of Engineered Surfaces with Measured Roughness, 九十二年中國機械工程學會第二十屆全國學術研討會
(10) 陳世育, 郭昌宏, "複合材料應用於鋼筋混凝土結構補強之有限元素分析," 九十四年電子計算機於土木水利工程應用研討會
(11) 許志義, 郭昌宏, "薄膜壓痕試驗之有限元素分析," 九十四年第二屆磨潤暨材料科技研討會
(12) 許志義, 郭昌宏, "應用三維有限元素模型分析薄膜壓痕量測試驗", 九十四年中國機械工程學會第二十二屆全國學術研討會
(13) 張譯文, 郭昌宏, "單晶體銅奈米壓痕試驗之分子動力模擬", 九十五年中國機械工程學會第二十三屆全國學術研討會
(14) 林秀芬, 郭昌宏, "非線性硬化材料之彈塑性滾滑動接觸分析", 九十七年中國機械工程學會第二十五屆全國學術研討會
(15) 林敬淶, 郭昌宏, "分子動力模擬探討壓痕深度與探針尖端半徑對於奈米壓痕試驗結果之影響", 九十七年中國機械工程學會第二十五屆全國學術研討會
(16) 林敬淶, 郭昌宏, "應用平行化分子動力模擬於奈米壓痕試驗", 九十八年中國機械工程學會第二十六屆全國學術研討會
(17) 郭昌宏,“邊界元素法應用於接觸問題分析,” The Third Workshop on Boundary Element Methods, Integral Equations and Related Topics in Taiwan, 2012
(18) C.-H. Kuo, “Analytical Modeling of Reciprocating Contacts due to Fretting,”1st Conference on Tribology Technology of Taiwan and Competition on Surface Engineering Application, 2013.
(19) 林祺惠、何泓儒、郭昌宏*、林仁輝, “水平軸風力發電機塔柱結構振動分析,” 一百零二年中國機械工程學會第三十屆全國學術研討會
(20) 何泓儒、林祺惠、郭昌宏*、林仁輝, “風力發電機葉片應力分析,” 一百零二年中國機械工程學會第三十屆全國學術研討會
(21) 陳品良、郭昌宏*, “線接觸彈液動潤滑分析,” 一百零二年中國機械工程學會第三十屆全國學術研討會
(22) C.-H. Kuo, “Analytical Modeling of Reciprocating Contacts due to Fretting,” 2013第一屆台灣磨潤科技研討會－CTTT
(23) C.-H. Kuo, “Elastic-Plastic Analysis of Fretting Contacts,” 2014 International Conference on Engineering Tribology Technology.
(24) C.-H. Kuo, “Analytical Modeling of Fatigue Cracks due to Fretting,” 第二屆臺灣磨潤科技研討會暨 2015海峽兩岸學術研討會
(25) Chang-Hung Kuo*, Hung-Ru Ho (2016, Nov). Cyclic Deformation Caused by Repeatedly Contact Loading. International Conference on Engineering Tribology and Applied Technology 2016.
(26) Chang-Hung Kuo, “Micro-Mechanical Modeling of Cyclic Deformation under Fretting Contact,” 2017, 第三屆臺灣磨潤科技研討會
(27) C.-H. Kuo, “Elastic-Plastic Contact Stress Analysis of Hardened Elements under Repeatedly Rolling/Sliding Contacts,” 2018 International Conference on Engineering Tribology and Applied Technology

Monograph:

C.-H. Kuo, Tribology-Lubricants and Lubrication . InTech. Oct, 2011

Ministry of Science and Technology Projects：

Micro-mechanical modeling of length scale effects on the fretting fatigue (2015/08/01- 2016/07/31)

Study of contact fatigue failure caused by fretting (2014/08/01-2015/07/31)

Study of cyclic plastic deformation and wear mechanisms in rolling/sliding contact elements due to fretting (2013/08/01- 2014/10/31)

Basic Reserch Center for Surface Engineering of Mechanical Key Components- Deep-rooting Plan of Industrial Base Technology Project (2013/01/01-2013/12/31)

Study of wear resistance of surface coatings under cyclic contact loading (2011/08/01- 2013/01/31)

Cyclic plastic deformation of carbon steels under repeated rolling and sliding contact (2009/08/01-2011/01/31)

Multi-scale modeling of mechanical and tribological properties of thin films (2006/08/01-2007/07/31)

Analytic modeling of tribological properties and failure mechanisms of diamond-like carbon thin films (2003/08/01-2004/07/31)

Three-dimensional micro-contact and fatigue failure analysis on real engineered surfaces (2/2) ( 2002/08/01-2003/07/31)

Three-dimensional micro-contact and fatigue failure analysis on real engineered surfaces (1/2) ( 2001/08/01-2002/07/31)

Numerical modeling and seismic evaluation of Sci-Tech Building at National Chi-Nan University (2000/08/01- 2001/07/31)

Analytical modeling and computer simulation in contact fatigue (1999/08/01-2000/07/31)

Undergradgate NSC Research Projects：

Analysis and design of wind turbine structures (Chi-Mien Chang) (2014/07/01-2015/02/28)

Application of element-free Galerkin method to two-dimensional contact stress analysis (Pei-Ying Chi) (2013/07/01-2014/02/28)

Academic experience

Education:

Ph.D., Northwestern University
M.S., National Taiwan University
B.S., National Cheng Kung University

Experiences:

Professor, National Chi Nan University, 2014-present
Associate Professor, National Chi Nan University, 1998-2014
Chairman, Dept. of Applied Materials and Optoelectronic Engineering, 2009-2010
Library Director, National Chi Nan University, 2000-2004
Member of Technical Staff, Rockwell Science Center (Teledyne Scientific & Imaging, LLC), 1997-1998
Research Associate, Center for Engineering Tribology, Northwestern University 1993-1997

Teaching courses

Statics
Dynamics
Elasticity
Advanced Engineering Mathematics (I)
Finite Element Method
Advanced Finite Element
Computation Materials Science
Engineering Mathematics (I),(II)
Numerical Analysis
Dynamics of Structures
Mechanical Behavior of Materials
Micromechanics

Research and interests

Computational Mechanics
Tribology
Micromechanics
Metal Fatigue
Computer Modeling of Materials
Dynamics of Structures

honor

Marquis Who's Who in the World, 2010-2015
Marquis Who's Who in Science and Engineering, 2011-2012
Marquis Who's Who in Asia, 2012
NCNU Teaching Contribution Award，2012-2013
Advising professor for outstanding teaching assistant (Statics)，2012- 2013

Domestic and foreign journals

(1) M. Wu, J. W. Rudnicki, C. H. Kuo and L. M. Keer, "Surface Deformation and Energy Release Rates for Constant Stress Drop Slip Zones in an Elastic Half-Space," Journal of Geophysical Research, 16,509-16,524, Vol. 96, 1991.
(2) W. Lin, C. H. Kuo and L. M. Keer, "Analysis of a Transversely Isotropic Halfspace under Normal and Tangential Loadings," ASME Journal of Tribology, 335-338, Vol. 113, 1991.
(3) L.M. Keer and C. H. Kuo, "Cracking in a Loaded, Brittle Elastic Half-Space," International Journal of Solids and Structures, 1819-1826, Vol. 29, 1992.
(4) C.H. Kuo and L. M. Keer, "Contact Stress Analysis of a Layered Transversely Isotropic Half-Space," ASME Journal of Tribology, 253-262, Vol. 114, 1992.
(5) C.H. Kuo, L. M. Keer and R. K. Steele, "Simulation of the Vertical Split Head Failure in Rails," International Journal of Solids and Structures, 2177-2197, Vol. 30, 1993.
(6) C.H. Kuo and L. M. Keer, "Contact Stress and Fracture Analysis of Articular Cartilage," Biomedical Engineering, 53-59, Vol. 5, 1993.
(7) C.H. Kuo, L. M. Keer and R. D. Cordes,"A Note on Line Spring Solutions for a Part-Through Crack," International Journal of Fracture, 1191-195, Vol.72, 1995.
(8) C.H. Kuo and L. M. Keer, "Three-Dimensional Analysis of Cracking in a Multi-Layered Composite," ASME Journal of Applied Mechanics, 273-281, Vol. 62,1995.
(9) C.H. Kuo, L. M. Keer and M. P. Bujold, "Effects of Multiple Cracking on Crack Growth and Coalescence in Contact Fatigue," ASME Journal of Tribology,385-390, Vol. 119, 1997.
(10) C.H. Kuo, "Mechanics of Contact Fatigue," 專題報導，中華民國力學學會會訊,第九十九期,中華民國九十一年八月
(11) C.H. Kuo, "Stress Disturbances Caused by the Inhomogeneity in an Elastic Half-Space Subjected to Contact Loading," International Journal of Solids and Structures, 860-873, Vol. 44, 2007. (2007 I.F=1.569, Mechanics Rank=15/112)
(12) C.H. Kuo, "Contact Stress Analysis of an Elastic Half-Plane Containing Multiple Inclusions," International Journal of Solids and Structures 45 4562-4573, 2008. (2008 I.F=1.809, Mechancis Rank=20/112)
(13) C.H. Kuo, "Boundary element methods for contact analysis,"(invited), Encyclopedia of Tribology, Springer, 2013.
(14) C.H. Kuo, "Elastic field due to an edge dislocation in a multilayered composite," International Journal of Solids and Structures 51, 1421-1433, 2014. (SCI, 20/137, Mechanics)
(15) C.H. Kuo, "Elastic-Plastic Analysis of Fretting Contacts," Key Engineering Materials, 248-252, Vol. 642, 2015.
(16) S. Kotšmíd, C-H Kuo, P. Beno, “Determination of Critical Load in a Nonuniform Circular Steel Column under the Eccentric Axial Load,” Mathematical Problems in Engineering, 1, 1-9, 2016 (EI).
(17) S. Kotšmíd, C-H Kuo, P. Beňo, “Buckling loads for steel tube with flattened ends,” Archive of Applied Mechanics, 87(6), 949–960, 2017 (SCI, 80/135, Mechanics).
(18) C-H Kuo*, S-F Lim, H-R Ho, “Cyclic Deformation Caused by Repeatedly Contact Loading. Applied Mechanics and Materials,” 883, 8-15, 2018. (EI).
(19) C-H Kuo, “Elasto-Plastic Contact Stress Analysis of Hardened Elements under Repeated Contact Loading,” Key Engineering Materials, 823, 91-96, 2019 (EI).

Domestic and foreign seminars

(1) "Interpretation of Coseismic Surface Deformation Data Using Three Dimensional Crack (Stress Drop) Models," NSF/USGS Workshop on Crustal Deformation Measurement and Earthquake Mechanics, March 18-22 1990, Monterey, CA.
(2) "Modeling of Coseismic Surface Deformation Using Non-Kinematic Approach," the 85th Annual Meeting of the Seismological Society of America, May 2-4 1990, Santa Cruzm, CA.
(3) "Cracking in a Loaded, Brittle Elastic Half-Space," George Hermann Anniversary Symposium, March 1991, San Diego.
(4) "Contact Stress Analysis of a Layered Transversely Isotropic Half-Space," 1991 ASME/STLE Tribology Conference.
(5) "Three-Dimensional Analysis of Cracking in a Multi-Layered Composite," 1993 ASME-EMD Meeting.
(6) "Effect of Mulctiple Cracking on Crack Growth and Coalescence in Contact Fatigue," 1996 ASME/STLE Tribology Conference.
(7) "Recent Development on Contact Faitgue Life Prediction in Gears," GM Gear Center Workshop, October 1996, Detroit, MI.
(8) C.-H. Kuo, "A Boundary Element Method for the Three-Dimensional Fracture Analysis of Multiple Cracking in Structural Materials," 八十八年「電子計算機於土木水利工程應用」研討會
(9) C.-H. Kuo, "Three-Dimensional Contact Stress Analysis of Engineered Surfaces with Measured Roughness, 九十二年中國機械工程學會第二十屆全國學術研討會
(10) 陳世育, 郭昌宏, "複合材料應用於鋼筋混凝土結構補強之有限元素分析," 九十四年電子計算機於土木水利工程應用研討會
(11) 許志義, 郭昌宏, "薄膜壓痕試驗之有限元素分析," 九十四年第二屆磨潤暨材料科技研討會
(12) 許志義, 郭昌宏, "應用三維有限元素模型分析薄膜壓痕量測試驗", 九十四年中國機械工程學會第二十二屆全國學術研討會
(13) 張譯文, 郭昌宏, "單晶體銅奈米壓痕試驗之分子動力模擬", 九十五年中國機械工程學會第二十三屆全國學術研討會
(14) 林秀芬, 郭昌宏, "非線性硬化材料之彈塑性滾滑動接觸分析", 九十七年中國機械工程學會第二十五屆全國學術研討會
(15) 林敬淶, 郭昌宏, "分子動力模擬探討壓痕深度與探針尖端半徑對於奈米壓痕試驗結果之影響", 九十七年中國機械工程學會第二十五屆全國學術研討會
(16) 林敬淶, 郭昌宏, "應用平行化分子動力模擬於奈米壓痕試驗", 九十八年中國機械工程學會第二十六屆全國學術研討會
(17) 郭昌宏,“邊界元素法應用於接觸問題分析,” The Third Workshop on Boundary Element Methods, Integral Equations and Related Topics in Taiwan, 2012
(18) C.-H. Kuo, “Analytical Modeling of Reciprocating Contacts due to Fretting,”1st Conference on Tribology Technology of Taiwan and Competition on Surface Engineering Application, 2013.
(19) 林祺惠、何泓儒、郭昌宏*、林仁輝, “水平軸風力發電機塔柱結構振動分析,” 一百零二年中國機械工程學會第三十屆全國學術研討會
(20) 何泓儒、林祺惠、郭昌宏*、林仁輝, “風力發電機葉片應力分析,” 一百零二年中國機械工程學會第三十屆全國學術研討會
(21) 陳品良、郭昌宏*, “線接觸彈液動潤滑分析,” 一百零二年中國機械工程學會第三十屆全國學術研討會
(22) C.-H. Kuo, “Analytical Modeling of Reciprocating Contacts due to Fretting,” 2013第一屆台灣磨潤科技研討會－CTTT
(23) C.-H. Kuo, “Elastic-Plastic Analysis of Fretting Contacts,” 2014 International Conference on Engineering Tribology Technology.
(24) C.-H. Kuo, “Analytical Modeling of Fatigue Cracks due to Fretting,” 第二屆臺灣磨潤科技研討會暨 2015海峽兩岸學術研討會
(25) Chang-Hung Kuo*, Hung-Ru Ho (2016, Nov). Cyclic Deformation Caused by Repeatedly Contact Loading. International Conference on Engineering Tribology and Applied Technology 2016.
(26) Chang-Hung Kuo, “Micro-Mechanical Modeling of Cyclic Deformation under Fretting Contact,” 2017, 第三屆臺灣磨潤科技研討會
(27) C.-H. Kuo, “Elastic-Plastic Contact Stress Analysis of Hardened Elements under Repeatedly Rolling/Sliding Contacts,” 2018 International Conference on Engineering Tribology and Applied Technology

Patents and technology transfers

Monograph:

C.-H. Kuo, Tribology-Lubricants and Lubrication . InTech. Oct, 2011

Execution plan