施明祥

姓名：施明祥 (SHIH, Ming-Hsiang)
職稱：土木系特聘教授
分機：4121
信箱：iloveaachen@ncnu.edu.tw
領域專長：

Earthquake Engineering: Structural Control, Semi-Active Damper and Isolation
Experimental Technique: Dynamic Testing, Application of Digital Image to Measurement, On-Line Monitoring, Experimental Biomechanics
Computers and Programming: Numerical Methods, Finite Element Method, Nonlinear Model, Computer aided Monitoring and Control
Green Engineering: Combination of Solar and Geothermal Energy

學歷

Dr.-Ing., Institute of Mechanics and Constructions, Rheinisch Westfallisch Technische Hochschule Aachen, Germany, 1991-1996
M.S., Civel Engineering, National Taiwan University, 1985-1987
B.S., Civil Engineering, National Chung-Hsing University, 1981-1985

Structural Dynamics
Numerical Analysis
Experimental Structural Mechanics
Structural Control

Earthquake Engineering: Structural Control, Semi-Active Damper and Isolation
Experimental Technique: Dynamic Testing, Application of Digital Image to Measurement, On-Line Monitoring, Experimental Biomechanics
Computers and Programming: Numerical Methods, Finite Element Method, Nonlinear Model, Computer aided Monitoring and Control
Green Engineering: Combination of Solar and Geothermal Energy

國內論文發表

”橋梁檢測方法與應用”專書，中國土木水利學會，2010，負責第四章之光學數位影像量測章節，ISBN 978-957-655-
473-5。
- Ming-Hsiang Shih (1996) “Eine aktive Regelung zur Schwingungsreduzierung von Bauwerken unter seiemischen Beanspruchungen”, Dissertation, RWTH Aachen, Germany.
- 施明祥(1987) “自動調整質量與勁度之結構控制機構”，國立台灣大學碩士論文，台北。

國外論文發表

Shih-Heng Tung*, Jui-Chao Kuo*, Ming-Hsiang Shih*, Wen-Pei Sung*, 2012, "Using the simplified 3D DIC method to measure the deformation of 3D surface", Applied Mechanics and Materials, Vol. 121-126, 3945-3949 (EI), NSC-99-2625-M-260-003.
Wen-Pei Sung, Ming-Hsiang Shih*, Darius Bacinskas and Gintaris Kaklauskas, "Experimental Verification and Analysis on Seismic Proof Performance of Velocity and Displacement Dependent Hydraulic Damper (VDHD)", INFORMATION, An International Interdisciplinary Journal (SCI), Accepted.
Ming-Hsiang Shih, Wen-Pei Sung*, 2011, "Development of Semi-Active Hydraulic Damper as Active Interaction Control Device to Withstand Earthquake", Advanced Science Letters (SCI, IF=1.253), Accepted.
Wen-Pei Sung, Ming-Hsiang Shih*, 2011, "Applying Spine-Type Prism to Improve Three Dimensional Dynamic Digital Image Techniques", Advanced Science Letter (SCI, IF=1.253), Accepted.
Ming-Hsiang Shih, Wen-Pei Sung, Shih-Heng Tung and Darius Bacinskas, 2011, "Developing Three-Dimensional Digital Image Correlation Techniques to Detect the surface smoothness of Construction Materials", International Journal of Material and Product Technology(SCI), Vol. 42, Nos. 3/4, pp.234-246, 2011.
Shih-Heng Tung*, Jui-Chao Kuo, Ming-Hsiang Shih, Wen-Pei Sung, 2011, "Application of simplified 3D Digital Image Correlation Method for Sheet Forming of Al Alloy 6061", Advanced Science Letters (SCI)(IF:1.253), Accepted.
L. Y. Lu*; G. L. Lin and M. H. Shih, 2012, "An experimental study on a generalized Maxwell model for nonlinear viscoelastic dampers used in seismic isolation", Engineering Structures, 34 (2012) 111-123, doi:10.1016/j.engstruct. 2011.09.012.
Wen-Pei Sung*, Ting-Yu Chen*, Ming-Hsiang Shih*, 2011, "Evaluation of cooling wall system and phenolic resin as thermal barrier in Buildings", Advanced Material Research (EI, ISSN: 1022-6680), Accepted.
Yu-Kuang Zhao, Ting-Yu Chen, Ming-Hsiang Shih, Wen-Pei Sung*, 2011, "Evaluating the influence of Indoor Temperature on the use of Phenolic Resin as construction material", Advanced Science Letter (SCI, IF=1.253), Accepted.
Wen-Pei Sung, Ting-Yu Chen, Ming-Hsiang Shih and Yu-Kuang Zhao, 2011, "Developing a Practical Geothermal Indoor Heating, Ventilation, & Air Conditioning System", Advanced Science Letters (SCI, IF=1.253), Accepted.
Ming-Hsiang Shih, Wen-Pei Sung, and Ming-Ju Wu, 2011, "Developing Dynamic Digital Image Techniques with Continuous Parameters to Detect Structural Damage", Advanced Science Letter (SCI, IF=1.253), Accepted.
Chung-Huan Sui, Cheer Germ Go, Ming-Hsiang Shih, Wen-Pei Sung, 2011, "Differentia of the Displacement Dependent Semi-Active Hydraulic Damper and Friction Damper in the Energy Dissipation in Structure Vibration", Advanced Science Letter (SCI, IF=1.253), Accepted.
Ming-Hsiang Shih*, Wen-Pei Sung* and S. C. Chen, 2011," Image Correlation Technique to Monitor Dynamic Response of Building under Earthquake Excitation", Advanced Science Letters (SCI, IF=1.253), in press.
Ming-Hsiang Shih, Wen-Pei Sung* and Feng-Jen Tsai, 2011, "Analysis Accuracy of Digital Image Correlation Technique to Monitor Natural Frequency Response of Building under Dynamic Excitation", Applied Mechanics and Materials (EI), Vols. 71-78, pp. 3904-3908, NSC-98-2625-M-260-001.
Wen-Pei Sung*, Ming-Hsiang Shih and Feng-Jen Tsai, 2011, "Development of Digital Image Correlation Technique to Monitor Structural Damage Based on Natural Frequency as Damage Index", Applied Mechanics and Materials (EI), Vols. 71-78, pp. 3899-3903, NSC-98-2625-M-260-001.
Cheer Germ Go*, Sung-Shun Peng, Ming-Hsiang Shih, Tzen-Chin Lee, 2011, "Digital-Image-Correlation to the Evaluation of the Confidence Range of Cleavage Strength of Concrete", Advanced Science Letters (SCI, EI, IF=1.253), 4, 1430-1433 (2011)., NSC-98-2625-M-260-001.
Shih-Heng Tung, Ming_Hsiang Shih*, 2011, "Precision Verification of a Simplified Three-Dimensional DIC Method", Optics and Lasers in Engineering(SCI, EI, IF=1.576), Vol. 49/issue 7 (2011) pp. 937-945, NSC-98-2625-M-260-001.
Wen-Pei Sung*, Ming-Hsiang Shih and Chang-Liang Chen, 2011, "Development of Seismic Isolation Techniques for Elevated Platform of Hi-Tech Factory Building", Advanced Science Letters(SCI, IF=1.253), Vol. 4, 759-763, 2011.
T.Y. Chen*, Wen-Pei Sung*, Ming-Hsiang Shih* and Yu-Kuang Zhao*, 2011, "Evaluating the Effectiveness of Applying Phenolic Resin as Thermal Barrier in Buildings During Summer and Winter", Applied Mechanics and Materials (EI), Vol. 44-47, pp. 2040-2044.
Wen-Pei Sung* , Ming-Hsiang Shih* and Yu-Kuang Zhao*, 2011, "Digital Imagine Correlation (DIC) Method for Detecting Crack Development in Construction Materials Subject to loading",Applied Mechanics and Materials (EI), Vol. 44-47, pp. 2524-2528.
Ming-Hsiang Shih*, Wen-Pei Sung*, Darius Bacinskas*, 2011, "Development of Digital Imagine Correlation (DIC) Method for Three-Dimensional Rugged Surface of Construction Material", Advanced Materials Research (EI), Vols. 243-249 (2011) pp 5907-5910, NSC-99-2625-M-260-003.
Ming-Hsiang Shih and Wen-Pei Sung, 2010, "A Design Concept of Autonomous Controller for Improving Seismic Proof Capability of Semi-Active Control Device", Experimental Techniques(SCI, EI, IF=0.505, Rank=74/122), Vol.34, No.4, pp. 20-26. (NSC-95-2625-Z-327-005).
Ming-Hsiang Shih, Wen-Pei Sung* and Chang-Liang Chen, 2010, "Earthquake Proof Efficacy of Velocity and Displacement Dependent Hydraulic Damper (VDHD) for R.C. Structures", The structural design of tall and special buildings (SCI, EI, IF=0.505, Rank=74/115), Vol. 19, pp. 479-496, 2010. (NSC-95-2625-Z-327-005).
M.-H. Shih , W.-P. Sung* and M.-J. Wu, "Development of Numerical Modeling of Analysis Program for Energy-Dissipating Behavior of Velocity Dependent Hydraulic Damper", Sadhana Academy Proceedings in Engineering Sciences (SCI, IF=0.279, Rank=67/87), Vol. 35, Part 5, October 2010, pp. 631-647 (NSC-95-2625-Z-327-005).
Wen-Pei Sung, Ming-Hsiang Shih* and Yu-Kuang Zhao, 2010, "Energy Dissipation Behaviours and Seismic Reduction Performance of a Proposed Velocity and Displacement Dependent Hydraulic Damper (VDHD)", Journal of Civil Engineering and Management, (SCI, EI, IF=3.711, Rank=3/115), pp. 428-438, Vol.13 No.3, September 2010, ISSN 1392-3730 (NSC-95-2625-Z-327-005).
Ming-Hsiang Shih, Wen-Pei Sung* and Chang-Liang Chen, 2010, "Vibration Control and Shock Absorption Techniques for Hi-Tech Manufacturing Plants", Journal of The Structural Design of Tall and Special Buildings, (SCI, EI, IF=0.261), Published online in Wiley Interscience (www.interscience.wiley.com). DOI: 10.1002/tal.625(NSC-95-2625-Z-327-005).
C.G. Go*, C.H. Sui, Ming-Hsiang Shih and Wen-Pei Sung, 2010, "A Linearization Model for the Displacement Dependent Semi-Active Hydraulic Damper", Journal of Vibration Control (SCI, EI, IF=0.656), Vol. 16, No. 14, pp. 2195-2214, May 1. 2010.
C. H. Sui, C. G. Go*, M. H. Shih and W. P. Sung, 2010, "Validity of the Displacement Dependent Semi-Active Hydraulic Damper Used in a Structure," Journal of Vibration and Control, (SCI, EI, IF=0.656), doi:10.1177/1077546309357693, Nov. 12 2010.
W. T. Lee, Y. J. Chiou*, M. H. Shih, 2010, "Reinforced Concrete Beam-Column Joint Strengthened with Carbon Fiber Reinforced Polymer (CFRP)", Composite Structures (SCI, IF=1.116), 92 (2010) pp. 48-60, doi:10.1016/j.compstruct. 2009.06.011. (NSC-97-2625-M-260-001).
Shih-Heng Tung, Ming-Hsiang Shih and Jui-Chao Kuo*, 2010, "Application of digital image correlation for anisotropic plastic deformation during tension testing", Optics and Lasers in Engineering (SCI, EI, IF=1.153), Vol. 48, May 2010, pp. 636-641. (NSC 97-2625-M-327 -002).
Jui-Chao Kuo, Shih-Heng Tung, Ming-Hsiang Shih and Yan-Yu Lu, 2010, "Characterization of Indentation-Induced Pattern Using Full-Field Strain Measurement", Strain, Vol. 46, 277-282,(SCI/EI) (IF:1.083) (2010/6) (NSC-96-2625- Z-327-002-)
I-Shan Lee, Wen-Pei Sung and Ming-Hsiang Shih 2009, "Dynamic Analyses of High-Speed Railway Bridge Structure under Moving Vehicles", Journal of Dynamical Systems and Geometric Theories (EI), Vol. 7, No.2, pp. 176-201.
Wen-Pei Sung, Ming-Hsiang Shih and Chung-Huan Sui, 2009, "Digital Image Correlation Technique versus Infinitely Small Element Technique for Crack Analysis of Pipe with Crevice", 2009 Sixth International Conference on Fuzzy Systems and Knowledge Discovery (EI), IEEE Computer Society, DOI 10.1109/FSKD.2009.419, August 13-16, 2009, Tianjin, China. (NSC-97- 2626-M-167-001).
Meng-Chia Weng, Shih-Heng Tung and Ming-Hsiang Shih, 2009, "Microscopic characteristics of problematic Tertiary sandstone as revealed by grain-wide local deformation", International Journal of Rock Mechanics and Mining Sciences (SCI, EI, IF=1.031), Vol.46, pp. 1243-1251. doi:10.1016/j.ijrmms.2009.04.005 (NSC-97-2625-M-260-001).
Ming-Hsiang Shih, Wen-Pei Sung* and Ching-Jong Wang, 2009, "A model for signal processing and predictive control of semi-active structural control system", Sadhana Academy Proceedings in Engineering Sciences (SCI, IF=0.287), Vol. 34, Part 3, June 2009, pp. 421-437. (NSC-95-2625-Z-327-005).
W. T. Lee, Y. J. Chiou*, M. H. Shih, 2009, "Digital Image Correlation Method on Analysis of Full Scale Reinforced Concrete Beam-Column Joint Test", Journal of Engineering Mechanics, (SCI, IF=0.787), in review. (NSC-97-2625 -M-260-001).
Shih-Heng Tung, Ming-Hsiang Shih and Wen-Pei Sung*, 2008, "Development of Digital Image Correlation Method to Analyze Crack Variations of Masonry Wall", Sadhana - Academy Proceedings in Engineering Science, Vol. 33, Part 6, 767-779, December 2008. (SCI/EI, IF=0.276)(NSC-96-2625-Z-327-002).
Wen-Pei Sung and Ming-Hsiang Shih, 2008, "Testing and Modeling for Energy Dissipation Behavior of Velocity and Displacement Dependent Hydraulic Damper", Journal of Tsinghua University-Science and Technology (EI), Vol. 13, No. S1, pp. 1-6, October 2008. (NSC-95-2625-Z-327-005).
Jui-Chao Kuo, Delphic Chen, Shih-Heng Tung, Ming-Hsiang Shih, 2008, "Prediction of the orientation spread in an aluminum bicrystal during plane strain compression using a DIC-based Taylor model", Computational Materials Science (SCI, EI, IF=1.549), Vol. 42/4 pp. 564-569, May 2008.
Jui-Chao Kuo, Delphic Chen, Shih-Heng Tung, Ming-Hsiang Shih, 2007, "Misorientation behavior of an aluminum bicrystal with 15.7° symmetric tilt boundary using simple shear", Journal of Material Science (SCI, EI, IF=1.181), Vol. 42, pp.7673-7677, June 2007.
Wen-Pei Sung, Ming-Hsiang Shih and Shih-Heng Tung, 2007, "Mathematical Modelling for Energy Dissipation Behavior of Velocity Dependent Hydraulic Damper with Throttle and Relief Valves", Journal of Civil Engineering Research and Practice, Vol. 4, No. 2, pp. 15-29.
Wen-Pei Sung, Cheer Germ Go and Ming-Hsiang Shih, 2007, "Finite Element Modeling for the Analysis of Cracked Cylindrical Pipes", Journal of Zhejiang University Science, An International Journal (SCI, EI), Vol. 8, No. 9, pp. 1373-1379.
Ming-Hsiang Shih and Wen-Pei Sung, 2007, "Predictive Control and Signal on Noise Reduction for Semi-Active Hydraulic Damper", International Journal of Structural Stability and Dynamics (SCI, EI, IF=0.721), Vol. 7, No. 1, pp. 129-149, March 2007. (NSC-94-2625-Z-327- 005).
Ching-Jong Wang and Ming-Hsiang Shih, 2007, "Performance Study of a bridge involving decks and pounded abutment during a violent earthquake", Engineering Structures (SCI, EI, IF=0.809), Vol.29, No. 5, pp.802-812.
Delphic Chen, Jui-Chao Kuo, Shih-Heng Tung and Ming-Hsiang Shih, 2007, "Characterization of misorientation gradient of an aluminum bicrystal in simple shear", Materials Science & Engineering A, 454-455(SCI, EI, IF=1.806), pp.523-527, April 2007.
Ming-Hsiang Shih, Chang-Liang Chen and Wen-Pei Sung, 2007, "Collapse Analysis of Building Structures under Excitation of Near-Fault Ground Motion with Consideration of Large Deformation and Displacement", The structural design of tall and special buildings (SCI, EI, IF=0.261), Vol. 16, pp. 165-180. (NSC 93-2211-E-167-002).
Ming-Hsiang Shih, Wen-pei Sung and Cheer Germ Go, 2006, "Development and seismic reduction performance of Velocity and Displacement Dependent Hydraulic Damper", Experimental Techniques (SCI, EI, IF=0.322), Vol. 30, No. 3, pp. 41-45, May/June 2006. (NSC-93-2625-Z-327- 003).
Ming-Hsiang Shih, Cheng-I Lin and Wen-Pei Sung, 2006, "Numerical analysis for shock absorption performance of accumulated semi-active hydraulic damper", Journal of Dynamic System and Geometric Theories (EI), Vol. 4, No. 1, pp. 29-45. (NSC-93-2625-Z-327-003)
Jong-Cheng Wu, Ming-Hsiang Shih, Yuh-Yi Lin, Ying-Chang Shen, 2005, "Design guidelines for tuned liquid column damper for structures responding to wind", Engineering Structures (SCI, EI, IF=0.809), Vol. 27, pp. 1983-1905. August 2005.
Wen-Pei Sung, Ming-Hsiang Shih, Cheer Germ Go, I-Fon Huang, 2005, "The Critical Loading for Lateral Buckling of Continuous Welded Rail", Journal of Zhejiang University Science, An International Journal (SCI, EI), Vol. 6A, No. 8, pp878-885. (NSC 93-2211-E-167-002)
Ming-Hsiang Shih, Chang-Liang Chen and Wen-Pei Sung, 2005, "Evaluation Method of Seismic Capability for Moment-Resisting Frames of Reinforced Concrete Structure-Reaction Modeling of Member Displacement", Journal of Dynamic System and Geometric Theories (EI), Vol. 3, No. 2, pp. 153-170, November 2005. (NSC-93-2625-Z-327-003)
Ming-Hsiang Shih and Wen-Pei Sung, "A model for hysteretic behavior of rhombic low yield strength steel added damping and stiffness", Computers & Structures (SCI, EI, IF=0.741), Vol. 83, pp. 895-908, May 2005, (NSC-93-2625-Z-327-003)
Ming-Hsiang Shih, Wen-Pei Sung and Cheer Germ Go, 2005, "The use of low yielding stress in a new energy absorber", Experimental Techniques (SCI, EI, IF=0.322), Vol. 29, No. 2, pp. 20-24. (NSC-93-2625-Z-327-003)
Ming-Hsiang Shih and Wen-Pei Sung, 2005, "The Optimum Structural Control Method-Neutral Equilibrium Mechanism", Journal of Information & Optimization Science (EI), ISSN-0252-2667, Vol. 26, No. 1, pp. 1-23, January 2005, (NSC-92-2625-Z-327-003)
Wen-Pei Sung, Ming-Hsiang Shih and Kuen-Suan Chen, 2005, "Evaluation Method for the Optimum Seismic Energy Dissipation Performance of Displacement Dependent Semi-Active Hydraulic Damper", Journal of Statistics and Management Science (EI, MathSCI), Vol. 8, No. 2, pp. 261-273. 2005/11 (國科會計畫編號：NSC 93-2211-e-167-002)
Wen-Pei Sung, Cheng-I Lin, Ming-Hsiang Shih and Cheer Germ Go, 2005, "Analysis Modeling for Buckling Load of Plate with Vibration Test", Journal of Zhejiang University Science (SCI, EI), Vol. 6A, No. 2, pp. 132-140.
Kuen-Suan Chen, Wen-Pei Sung and Ming-Hsiang Shih, 2005, "Reliable Evaluation Method of Quality Control for Compressive Strength of Concrete", Journal of Zhejiang University Science (SCI, EI), Vol. 6A, No. 8, pp. 836-843.
Ming-Hsiang Shih, Wen-Pei Sung and Kuen-Suan Chen, 2004, "The Optimum Simulation Method for Added Damping and Stiffness Device", Journal of Information & Optimization Science (EI), ISSN-0252-2667, Vol. 25, No. 3, pp.423-439, September 2004 (NSC-92-2625-Z-327-003)
Ming-Hsiang Shih and Wen-Pei Sung, 2004, "The Energy Dissipation Behavior of Displacement Dependent Semi-Active Hydraulic Damper", Journal of Structural Mechanics and Earthquake Engineering (EI), Japan Society of Civil Engineering, Vol. 21, No. 2, pp. 121s-129s, 2004 October, (NSC-92-2625-Z-327-003)
Ming-Hsiang Shih, Wen-Pei Sung and Cheer Germ Go, 2004, "Investigation of Newly Developed Added Damping and Stiffness Device with Low Yield Strength Steel", Journal of Zhejiang University Science (SCI, EI), Vol. 5, No. 3, pp. 326-334. , (NSC-92-2625-Z-327-003)
Wen-Pei Sung, Kuen-Suan Chen and Ming-Hsiang Shih, "Reliability Method for Exacting Device of Test Tool of Chloride Ion in Concrete", Journal of Shandong University-Engineering Science, Vol. 34 Supp., Aug. 2004, Art.-ID:1672-3961(2004) Supp-0131, pp.1-11.
Wen-Pei Sung, Ming-Hsiang Shih and Vernon C. Matzen, 2004, "Time Domain System Identification of Unknown Initial Conditions", Journal of Zhejiang University Science (SCI, EI), Vol. 5, No. 9, pp. 1035-1044.
Wen-Pei Sung, Kuen-Suan Chen and Ming-Hsiang Shih, 2004, "Quantity Analysis for Welding Performance in Manufacturing Process", International Journal of Advanced Manufacturing Technology (SCI, EI, IF=0.352), Vol. 23, No. 1, pp. 707-711. March 2004.
Ming-Hsiang Shih, Wen-Pei Sung and Cheer Germ Go, 2003, "A Design Concept with a Displacement Dependent Semi-Active Hydraulic Damper for Energy Dissipation", Experimental Techniques (SCI, EI, IF=0.322), Vol. 27, No. 6, pp. 53-56. (NSC 91-2625-Z-327-003)
Cheng I Lin, Wen-Pei Sung, Ming-Hsiang Shih and Cheer Germ Go, 2003, "Analysis of Bearing Capability of Anchor Bolt Embedding in Concrete", J. of CCIT (EI), Vol.31, No. 2, pp.49-59.
Wen-Pei Sung, Ming-Hsiang Shih and Kuen-Suan Chen, 2003, "Analytical Method for Promoting Process Capability of Shock Absorption Steel", Journal of Zhejiang University Science (SCI, EI), Vol. 4, No. 4, pp. 388-392, (NSC-91-2625-Z-327-003)
Ming-Hsiang Shih, Wen-Pei Sung and Cheer Germ Go, 2002, "Development of Accumulated Semi-Active Hydraulic Damper", Experimental Techniques (SCI, EI, IF=0.322), Vol. 26, No. 5, pp. 29-32. , (NSC-89-2625-Z-327-005)
Wen-Pei Sung, Ming-Hsiang Shih and Cheer Germ Go, 2002, "Analysis Modeling for the Sequence of Local Buckling of Crack Thin Plate Under Tension", J. of CCIT (EI), Vol. 30, No. 2, pp. 61-72.
施明祥，童士恒，宋文沛，郭瑞昭，2008，「數位影像相關係數法在橋梁動靜態變位監測之應用」，土木水利，第35?，第5期，第64頁至71頁，2008年10月。
童士恒，施明祥，郭瑞昭，翁孟嘉，2008，「數位影像量測技術於土木工程監檢測之應用」，地工技術，第26?，第117期，第81頁至第90頁，2008年9月。
宋文沛，施明祥，郭其珍，林政毅，2005，「含泄流閥之黏滯油壓阻尼器的力學行?研究」，興大工程學刊，第16卷，第2期，第131頁至第140頁。
盧煉元，施明祥，曾旭玟，吳政彥，「滑動隔震支承之研發與其受近斷層震波行為之實驗探討」，結構工程，第20?，第3期，第29-59頁，2005年9月。
施明祥，宋文沛，2004，「新型結構控制機構之應用研究－臨界平衡控制機構」，中國科技發展精典文庫第三輯，北京中國科技報研究會出版 (NSC-92-2625-Z-327-003)。
宋文沛，施明祥，隋忠寰，郭其珍，2004，「半主動位移相依阻尼器消能行為之數值分析模式」，土木工程技術，預計刊登於第8卷，第1期，第1頁至第17頁 (NSC-92-2625-Z-327-003)。
施明祥，宋文沛，陳亮宏，郭其珍，2004，「蓄壓式半主動油壓阻尼器消能行為之數值分析模式」，土木工程技術，第8卷，第5期，第1頁至第14頁(NSC-92-2625-Z-327-003)。
施明祥，宋文沛，2003，「降伏加勁阻尼裝置之實驗與理論分析研究」，技術學刊，第18卷，第3期，第295頁至第302頁，(NSC-91-2625-Z-327-003)。
施明祥，宋文沛，鍾文鐘，李一聖(2003)"蓄壓式半主動油阻尼器之理論分析研究"，結構工程，第十八卷第一期，37-49頁，2003年3月，(NSC-91-2625-Z-327-003)。
施明祥，宋文沛，鍾文鐘(2003)"位移相依半主動油壓阻尼器之消能行為研究"，結構工程，第十八卷第一期，51-62頁，2003年3月，(NSC-91-2625-Z-327-003)。
盧煉元，施明祥，張婉妮，2003，"近斷層震波對滑動式隔震結構之影響評估"，結構工程，第十八卷第四期，23-48頁，2003年12月。
施明祥，宋文沛(2002)"新型耐震鋼板簡介"，現代營建，274期，73-80頁，2002年10月，(NSC-90-2625-Z-327-004)。
施明祥，宋文沛，鍾文鐘 (2002) "位移相依半主動油壓阻尼器之設計與行為研究"，結構工程，第十七?第一期，81-90頁，2002年3月，(NSC-90-2625-Z-327-004)。(獲推選為2002年結構工程論著獎)
宋文沛，施明祥，陳坤盛 (2002) "混凝土抗壓強度品質之評估方法研究"，技術學刊，第十七卷第二期，203-209頁。
施明祥，宋文沛，郭其珍，呂高豐 (2001) "低降伏菱形鋼板之耐震性能研究"，土木工程技術，第4卷，第4期，41-50頁，(NSC-89-2625-Z-327-005)。
施明祥，宋文沛，郭其珍 (2001) "低降伏強度鋼材之性能驗證"，興大工程學刊，第12卷，第1期，65-70頁，(NSC-89-2625-Z-327-005)。
施明祥(2001) "液流阻尼器-高樓耐震新利器"，營建知訊，台灣營建研究院， 2001年8月，20-26頁，(NSC-89-2625-Z-327-005)。
Wen-Pei Sung, Ming-Hsiang Shih (1999) "System for Identification Using Initial Conditions as Active Parameters", 勤益學報第十七期，365-377。

國內研討會

施明祥、童士恒、宋文沛、郭其珍，"數位影像相關方法在地震防災及結構監測之應用"，中華民國第十屆結構工程研討會，論文編號209，桃園楊梅，2010年12月1-3日。
- 宋文沛、施明祥、隋忠寰，"數位影像關係法分析含裂維生管受內水壓力之應變分析"，中華民國第十屆結構工程研討會，論文編號203，桃園楊梅，2010年12月1-3日。
- 童士恒、施明?、吳宛錚，" ?位影像相關係?法於微觀鑽孔法應用之研究"，中華民國第十屆結構工程研討會，論文編號210，桃園楊梅，2010年12月1-3日。
- 郭其珍、施明祥、李增欽，"數位影像相關係數法於混凝土張力開裂之監測"，中華民國第十屆結構工程研討會，論文編號209，桃園楊梅，2010年12月1-3日。
- 童士恒、施明祥、葉明龍、俞肇球、江政賢、陳慶頤、黃渝紋，2009年12月11-12日，"數位影像相關係數法於生醫工程應用之研究"，2009生物醫學工程國際研討會暨中華民國生物醫學工程學會年度學術研討會，台北。
- 施明祥、童士恒、宋文沛、李威璁，"鋼筋混凝土樑柱接頭破壞行為觀測之研究"，九十八年電子計算機在土木水利工程應用研討會，143-148頁，新竹，2009年9月3-4日。
- 施明祥、童士恒、郭瑞昭、吳宛錚，" 液態介質於降低反光對微觀數位影像相關係數法影響之探討"，九十八年電子計算機在土木水利工程應用研討會，715-720頁，新竹，2009年9月3-4日。
- 翁孟嘉、童士恒、施明祥、俞肇球、黃耀增，"?位影像相關係?法於岩石微觀變形之應用"，2008岩盤工程研討會，台北，2008年10月30-31日。
- 施明祥、童士恒、郭瑞昭，"影像分析在結構變形監檢測的應用"，非破壞性監、檢測與工程管理研討會，高雄，民國97年10月25日。
- 童士恒、施明祥、楊元森、李宛瑾，"Application of the Digital Image Correlation Method to the Column Deformation Measurement in a Push Over Test in Guan-Miao Elementary School", The 9th National Conference on Structure Engineering, Paper No. M-275, pp. 1-8, Kaohsiung, Taiwan. , 22-24 Aug. 2008.
- 宋文沛、施明祥，" Development of Digital Imagine Correlation Method for Investigating Crack Variation of Brick Wall and Reinforced Concrete Beam Subject to loading", The 9th National Conference on Structure Engineering, Paper No. M-275, pp. 1-8, Kaohsiung, Taiwan. , 22-24 Aug. 2008.
- 宋文沛、施明祥、陳墇?，" Study on the Energy-Dissipating Behavior of Velocity and Displacement Dependent Semi-Active Hydraulic Damper", The 9th National Conference on Structure Engineering, Paper No. M-275, pp. 1-8, Kaohsiung, Taiwan. , 22-24 Aug. 2008.
- 施明祥，童士恒，楊元森，"現地試驗影像量測"，校舍耐震補強現地實驗成果研討會論文集，國家地震工程研究中心NCREE-08-001，民國97年1月25日， pp. 125-141。
- Y.Y. Lu, J.C. Kuo, S.H. Tung, M.H. Shih, "On anisotropy of indentation induced piling-up by using optical microstrain measurement",中華民國材料科學學會年會2006, 台南, 台灣.
- Y.Y. Liao, C.T. Hsueh, J.C. Kuo, S.H. Tung, M.H. Shih, "On The Influence of Friction Using Simulation and Experiment Approach",中華民國材料科學學會年會2006, 台南, 台灣.
- 施明祥、宋文沛、童士恒、郭瑞昭、楊婕，"?位影像相關係?法於非均質材?應變分析及?縫觀測之應用"，中華民國第八屆結構工程研討會，Paper No. M-008，Sun Moon Lake, Taiwan, R. O. C., 1-3 Sept. 2006。
- 童士恒、郭瑞昭、施明祥、蔡源?，"校正由影像扭曲所導致?位影像關係法分析誤差之研究"，中華民國第八屆結構工程研討會，Paper No. L-017，Sun Moon Lake, Taiwan, R. O. C., 1-3 Sept. 2006。
- 施明祥，宋文沛，郭其珍，"減震系統之訊號處理與預測控制"，中華民國第八屆結構工程研討會，Paper No. N-011，Sun Moon Lake, Taiwan, R. O. C., 1-3 Sept. 2006。
- 施明祥、宋文沛、黃文光，"速度與位移相依油壓阻尼器之消能行為研究"，中華民國第八屆結構工程研討會，Paper No. N-017，Sun Moon Lake, Taiwan, R. O. C., 1-3 Sept. 2006。
- 隋忠寰、郭其珍、施明祥、宋文沛，"位移相依半主動油壓阻尼器之動態機制與消能?為"，中華民國第八屆結構工程研討會，Paper No. H-019，Sun Moon Lake, Taiwan, R. O. C., 1-3 Sept. 2006。
- 陳墇?、施明祥，" 鋼筋混凝土構件被動圍束效應之?別與評估" ，中華民國第八屆結構工程研討會，Paper No. O-019，Sun Moon Lake, Taiwan, R. O. C., 1-3 Sept. 2006。
- 陳墇?、施明祥，"應用尋優演算法?別鋼筋混凝土系統之遲滯模型??" ，中華民國第八屆結構工程研討會，Paper No. O-020，Sun Moon Lake, Taiwan, R. O. C., 1-3 Sept. 2006。
- ??元、施明祥、吳政彥、許朝畯、?奕?，" 錐形摩擦單擺支承之實驗研究"，中華民國第八屆結構工程研討會，Paper No. H-004，Sun Moon Lake, Taiwan, R. O. C., 1-3 Sept. 2006。
- 施明祥、宋文沛、童士恒、郭瑞昭、楊婕，" ?位影像相關法在?縫觀測之應用"，第13屆非破壞檢測技術研討會，中壢，2006年4月28-29日。
- 郭瑞昭，童士恒，施明祥，陳志慶(2005)" ?位光學測?於固體材?變形分析之應用"，九十四?電子計算機於土木水?應用研討會，2005年8月，台南。
- 施明祥(2005)"油壓半主動斜撐之研發與試驗驗證"，高科大工學院2005年教師研發成果研討會，p.101-p.106，2005年3月，高雄。
- 施明祥(2004) "油壓半主動斜撐之研發與足尺模型振動台試驗(III)"，國科會93年度防救災專案計畫成果研討會。
- 施明祥，宋文沛(2004)"蓄壓式半主動油壓阻尼器之行為研究" ，第七屆結構工程研討會，桃園，(NSC-92-2625-Z-327-003)。
- 施明祥，宋文沛，隋忠寰(2004)"位移相依半主動油壓阻尼器之消能行為研究"，第七屆結構工程研討會，桃園，(NSC-92-2625-Z-327-003)。
- 施明祥，林政毅，宋文沛(2004)"含洩流閥之黏滯油壓阻尼器的力學行為研究"，第七屆結構工程研討會，桃園，(NSC-92-2625-Z-327-003)。
- 施明祥，宋文沛(2004)"低降伏加勁阻尼裝置之研發"，第七屆結構工程研討會，桃園，(NSC-92-2625-Z-327-003)。
- 陳墇?，施明祥(2004)"近斷層區域之結構動態P-Δ效應"，第七屆結構工程研討會，桃園，(NSC-92-2625-Z-327-003)。
- 宋文沛，施明祥，郭其珍(2004)"長重鐵軌側向挫屈臨界載重之數值分析" ，第七屆結構工程研討會，桃園。
- 宋文沛，施明祥，陳亮宏，郭其珍(2004)"蓄壓式半主動油壓阻尼器消能行為之數值模擬模式" ，第七屆結構工程研討會，桃園，(NSC-92-2625-Z-327-003)。
- ??元，施明祥，吳政彥(2004)"變曲??動隔震支承之遲滯?為??與實驗研究" ，第七屆結構工程研討會，桃園。
- 陳坤盛，施明祥，宋文沛(2004)"降伏加勁阻尼裝置理論分析之統計驗證研究" ，第七屆結構工程研討會，桃園，(NSC-92-2625-Z-327-003)。
- Kuen-Suan Chen, Wen-Pei Sung, Ming-Hsiang Shih (2004), "Quality Evaluation Model for Multi-Quality Property of Semi-active Hydraulic Damper", 第七屆結構工程研討會，桃園，(NSC-92-2625-Z-327-003)。
- 隋忠寰，宋文沛，施明祥，郭其珍，2003，「半主動位移相依阻尼器之數值理論模擬」，中華民國第27屆年力學學會年會研討會，台南，(NSC-91-2625-Z-327-003)。
- 施明祥，宋文沛，郭其珍(2002)"臨界平衡控制機構之研究"，第六屆結構工程研討會，墾丁，(NSC-90-2625-Z-327-004)。
- 童士恒，施明祥(2002)"高速鐵路橋樑跨距對地表微振波傳的影響之研究"，第六屆結構工程研討會，墾丁。
- 鄭錦銅、赫偉業、施明祥(2002)"搖擺橋柱隔震法之擺動分析與試驗"，第六屆結構工程研討會，墾丁。
- 宋文沛、陳坤盛、施明祥、郭其珍(2002)"鋼鐵材料之製程能力分析"，第六屆結構工程研討會，墾丁。
- 施明祥，鍾文鐘(2001) "半主動油壓阻尼器的研發與應用"，建築隔減震技術研討會，正修技術學院，(NSC-89-2625-Z-327-005)。
- 施明祥，許慶鏞(2000) "半主動及被動減震控制之勁度效應"，第五屆結構工程研討會，溪頭，(NSC-90-2625-Z-327-004)。
- 施明祥，鄭錦銅，董瀚友(2001) "RC結構樑柱接頭補強成效驗證"，應用於土木結構之耐震材料研發八十九學年度期末研究成果研討會，145-164頁，(NSC-89-2218-E-327-005)。
- 盧煉元，施明祥，張婉妮(2001) "近斷層地區重要建物之隔震防災策略研究(I)"，防災重要建物之耐震對策八十九學年度期末研究成果研討會，260-283頁。
- 施明祥，鄭錦銅，陳益源，董瀚友(2001) "RC結構樑柱接頭補強成效驗證"，應用於土木結構之耐震材料研發八十九學年度期中研究成果研討會，123-139頁，(NSC-89-2218-E-327-005)。
- 盧煉元，施明祥，張婉妮(2001) "近斷層地區重要建物之隔震防災策略研究(I)"，防災重要建物之耐震對策八十九學年度期中研究成果研討會，170-185頁。
- 鄭錦銅，施明祥，盧煉元，陳建治，莫詒隆(1999) "集集大震之橋樑破壞研討"，1999集集大地震災害調查研討會，1999年11月5-6日，台南，B23-B46頁。
- 丁育群，施明祥，余志鵬(1999) "國外建築物震害經驗、教訓及防災應用研究"，內政部建築研究所八十八年度研究成果發表會，第六冊，台北。
- 施明祥(1998) "主動接頭在高樓結構減震之用途"，第四屆結構工程研討會，台北。

國外研討會

Ming-Hsiang, Shih, Jui-Ling Peng, Yeong-Bin Yang, Shyh-Rong Kuo, "Applying Digital Image Correlation Method to Experiment of Geometric Nonlinear Behavior", 3rd International Symposium on Computational Mechanics (ISCM III) and 2nd Symposium on Computational Structural Engineering (CSE II), 5-7 December, 2011, Taipei, Taiwan[invited talk].
M.H. Shih, S.H. Tung and W.P. Sung, 2011, "Innovative Three Dimensional Digital Image Correlation Technology for Dynamical Measurement", Proceedings of the Thirteenth International Conference on Civil, Structural and Environmental Engineering Computing, ISBN 978-1-905088-46-1, Paper 114, 6-8 September 2011, Chania, Crete, Greece.
S.H. Tung, M.H. Shih and J.C. Kuo, 2011, "Application of the Digital Image Correlation Method to Micro Hole Drilling", Proceedings of the Thirteenth International Conference on Civil, Structural and Environmental Engineering Computing, ISBN 978-1-905088-46-1, Paper 113, 6-8 September 2011, Chania, Crete, Greece.
S.H. Tung and M.H. Shih, 2010, "Application of the Digital Image Correlation Method to the Identification of Landslides", Proceedings of the Seventh International Conference on Engineering Computational Technology, ISBN 978-1-905088-40-9, Paper 138, 14-17 September 2010, Valencia, Spain.
M.H. Shih, W.P. Sung and S.H. Tung, 2010, "Using the Digital Image Correlation Technique to Measure the Mode Shape of a Cantilever Beam", Proceedings of the Tenth International Conference on Computational Structures Technology, ISBN 978-1-905088-37-9, Paper 65, 14-17 September 2010, Valencia, Spain.
M. H. Shih, W. P. Sung, 2010, "Study on the Research and Development of Interaction Structural Control Device", 5th World Conference on Structural Control and Monitoring, Paper 227, July 12-14 2010, Tokyo, Japan.
W. P. Sung, M. H. Shih, H. Huang and F. J. Tsai, "Development of Digital Image Correlation Method to Detect the Real-Time Dynamic Response of Building under Excitation", 5th World Conference on Structural Control and Monitoring, Paper 138, July 12-14 2010, Tokyo, Japan.
Yeong-Bin Yang, Shyh-Rong Kuo, Jui-Ling Peng, and Ming-Hsiang Shih , 2010, "Applications of Rigid Body and Force Equilibrium Concepts in Deriving the Geometric Nonlinear Strain Energy for Plates", The Russia - Austria Joint Workshop on Advanced Dynamics and Model Based Control of Structures and Machines, April 26 - 28 2010, Linz, Austria
M. H. Shih, W. P. Sung and J. L. Chen, 2010, "Seismic behavior of retaining wall-backfill systems with vegetation", Proceedings of the 5th International Conference on Responsive Manufacturing-Green Manufacturing ICRM2010 (EI), pp.482-487, 11-13 January 2010, Ningbo, China.
M.H. Shih, H. Huang, C. F. Wu, S.H. Tung, 2010, "The quality assurance method for newly developed light brick", Proceedings of the 5th International Conference on Responsive Manufacturing-Green Manufacturing ICRM2010 (EI), pp.300-305, 11-13 January 2010, Ningbo, China.
S.H. Tung, M.H. Shih, W. P. Sung, J. G. Shyu, 2010, "Testing method for porosity foam heat insulation construction material", Proceedings of the 5th International Conference on Responsive Manufacturing-Green Manufacturing ICRM2010 (EI), pp.171-177, 11-13 January 2010, Ningbo, China.
Ming-Hsiang Shih, Wen-Pei Sung, 2009, "Energy Dissipation Behavior of an Autonomous Controller for Semi-Active Control Device", Proceedings of the ASME 2009 Pressure Vessels and Piping Division Conference, PVP2009, Paper No. 77133, July 26-30, 2009, Prague, Czech Republic.
S.H. Tung, M.H. Shih and J.C. Kuo, 2009, "Evaluation of the Joint Roughness Coefficient using the Digital Image Correlation Method", Proceedings of the Twelfth International Conference on Civil, Structural and Environmental Engineering Computing, 2009, doi:, Paper 229, pp.1-12, September 1-4, Funchal, Madeira, Portugal.
Wen-Pei Sung and Ming-Hsiang Shih, 2008, "Seismic Reduction Performance of Predictive Control Velocity Predictor for Semi-Active Hydraulic Damper", Proceedings of the 14th World Conference on Earthquake Engineering, Paper No. 14-0008, October 12-17, 2008, Beijing, China.
Wen-Pei Sung, Ming-Hsiang Shih and Chiang-Liang Chen, 2008, "Seismic Resistant Capability Analysis for Moment-Resisting Frames of Reinforced Concrete Structure with Consideration of Member Displacement Reaction", Eleventh East Asia-Pacific Conference on Structural Engineering & Construction (EASEC-11), Paper No. 40, November 19-21, Taipei, Taiwan.
S.-H. Tung, M.-H. Shih and Y.-S. Yang, 2008, "Application of the Digital-Image-Correlation Technique to Measure the Deformation of a Seismic Retrofitted Column for a Two-Storey Building",Proceedings of the Ninth International Conference on Computational Structures Technology, 2008, doi:10.4203/ccp.88.289, Paper 289, pp.1-12, September 2-5, Athens Greece.
M.C. Weng, S.H. Tung, M.H. Shih, C.C. Yu and Y.T. Huang, 2008, "Characterizing the Deformation Behavior of Weak Sandstone from Micro-Vision", Proceedings of the Sixth International Conference on Engineering Computational Technology, 2008, Paper 165, pp.1-12, September 2-5, Athens Greece.
Sung, Wen-Pei, Shih, Ming-Hsiang, 2008, "Testing and Modeling for Energy Dissipation Behavior of Velocity and Displacement Dependent Hydraulic Damper", 12th International Conference on Computing in Civil and Building Engineering & 2008 International Conference on Information Technology in Constructio, Beijing, China from October 16 to 18.
Wen-Pei Sung, Ming-Hsiang Shih, Chung-Huan Sui, "Study on the Equivalent Damping Ratio and Energy Reduction Performance of Displacement Dependent Semi-active Hydraulic Damper", 8thPacific Conference on Earthquake Engineering 2007, Paper No. 103, 5-7 December, Sigapore.
Ming-Hsiang Shih, Wen-Pei Sung, Shih-Heng Tung and Jui-Chao Kuo, "Application of Digital Image Correlation Method for Experimental Study of Shear Hysteresis Behavior of Welded Joint", Structural Engineering World Conference 2007, Paper No. 22.2, 2-7 November, Bangalore, India.(Abstract)
Wen-Pei Sung, Ming-Hsiang Shih, Shih-Heng Tung, "A Mathematical Model for Mechanical Behavior of Viscous Hydraulic Damper with Throttle and Relief Valves", Structural Engineering World Conference 2007, Paper No. 22.2, 2-7 November, Bangalore, India.
W.P. Sung, M.H. Shih and S. P. Hsu, 2007, "The Energy Dissipation Performance of Displacement Dependent Semi-Active Hydraulic Damper", World Forum on Smart Structures and Technology-2007, Paper No. 8, 26-27 May, Nanking, China.
Wen-Pei Sung, Ming-Hsiang Shih and Shou-Ping Hsu, 2007, "The Energy Dissipation Performance of Displacement Dependent Semi-Active Hydraulic Damper", World Forum on Smart Materials and Smart Structures Technology, Chongqing & Nanjing, China, Paper No. 8.
Ming-Hsiang Shih and Wen-Pei Sung, 2006, "Development and Testing of Autonomous Controller for Semi-Active Control Device", The 1st European Conference on Earthquake Engineering and Seismology, Geneva, Switzerland, Paper No. 697.
Wen-Pei Sung and Ming-Hsiang Shih, 2006, "Seismic Reduction Performance of Predictive Control Velocity Predictor for Semi-Active Hydraulic Damper", The 1st European Conference on Earthquake Engineering and Seismology, Geneva, Switzerland, Paper No. 699.
Ming-Hsiang Shih and Wen-Pei Sung, 2006, "Noise Reduction of Signal Process for Predictive Control of Semi-Active Hydraulic Damper", The 4th World Conference on Structural Control and Monitoring, San Diego, U.S.A., Paper No. 17.
Wen-Pei Sung, Ming-Hsiang Shih and Shou-Ping Hsu, 2006, "Mathematical Modeling and Seismic Proof Performance of Velocity and Displacement Dependent Hydraulic Damper", The 4thWorld Conference on Structural Control and Monitoring, San Diego, U.S.A., Paper No. 16.
M.H. Shih, S.H. Tung, J.C. Kuo and W.P. Sung, 2006, "The Application of a Digital Image Correlation Method for Crack Observation", Proceedings of the Eighth International Conference on Computational Structures Technology, ISBN-10 1-905088-08-6, Civil-Comp Press, doi:10.4203/ccp.83.86, Sep. 12-15, 2006, Las Palmas, Spain.
S.H. Tung, J.C. Kuo and M.H. Shih, 2006, "Calibration of the Image Distortion Induced Error for a Plane Strain Field Measured Using Digital Image Correlation Techniques", Proceedings of the Fifth International Conference on Engineering Computational Technology, ISBN-10 1-905088-11-6, Civil-Comp Press, doi:10.4203/ccp.84.138, Sep. 12-15, 2006, Las Palmas, Spain.
Shih-Heng Tung, Jui-Chao Kuo and Ming-Hsiang Shih, 2005, "Strain Distribution Analysis Using Digital-Image-Correlation Techniques", The Eighteenth KKCNN Symposium on Civil Engineering, ISBN 986-80222-3-1, Paper No. NTU29, Dec. 18-21, 2005, Kaohsiung.
M.-H. Shih and W.-P. Sung, 2005, "Signal Processing and Predictive Control of a Semi-Active Structural Control System", Proceedings of the Tenth International Conference on Civil, Structural and Environmental Engineering Computing, ISBN 1-905088-00-0, doi:10.4203/ccp.81.207, pp. 1-12, Aug. 30-Sep.2 2005, Rome. NSC94-2625-Z-327-005.
W.-P. Sung and M.-H. Shih, 2005. "Analysis and Modelling of the Energy Dissipation Behaviour of Velocity and Displacement Dependent Hydraulic Dampers", Proceedings of the Tenth International Conference on Civil, Structural and Environmental Engineering Computing, ISBN 1-905088-00-0, doi:10.4203/ ccp.81.208, pp.1-9, Aug. 30-Sep.2 2005 Rome. NSC94-2625-Z-327-005.
S.H. Tung, C.C. Yu, W.H. Lee and M.H. Shih, "The Isolation Efficiency of the Dual-Trench System in a Three Dimensional Wave Propagation Problem", Proceedings of the Tenth International Conference on Civil, Structural and Environmental Engineering Computing, ISBN 1-905088-00-0, doi:10.4203/ccp.81.210, pp1-10, Aug. 30-Sep.2 2005, Rome.
Ming-Hsiang Shih, Wen-Pei Sung, Cheer Germ Go, "Development of Accumulated Semi-Active Hydraulic Dampers", 13th World Conference on Earthquake Engineering (Oral), Paper No. 1963,August 1 - 6, 2004, Vancouver, B.C., Canada, (NSC-93-2625-Z-327-003).
Wen-Pei Sung, Ming-Hsiang Shih, Kuen-Suan Chen and Cheer Germ Go, "Neutral Equilibrium Mechanism for Structural Control", 13th World Conference on Earthquake Engineering, Paper No. 3236, August 1 - 6, 2004, Vancouver, B.C., Canada, (NSC-92-2625-Z-327-003).
L.-Y. Lu, M.-H. Shih, C.-Y. Wu, C.-S. Chang-Chien," NEAR-FAULT SEISMIC ISOLATION USING SLIDING BEARINGS WITH VARIABLE CURVATURES", 13th World Conference on Earthquake Engineering (Oral), Paper No. 3264, August 1 - 6, 2004, Vancouver, B.C., Canada.
Wen-Pei Sung, Kuen-Suan Chen and Ming-Hsiang Shih, 2004, "Reliability Method for Exacting Device of Test Tool of Chloride Ion in Concrete", The 11th International Manufacturing Conference in China (IMCC 2004)- Integration of management and Technology-, Sundong, China.
W. P. Sung, C. G. Go and M. H. Shih, "Using Super Element for the Solution of Cracked Shell at Cylindrical Pressure Vessels", International Symposium on New Perspectives for Shell and Spatial Structures, October 22-26, 2003, Taipei, Taiwan. paper No. 164.
Lu, L. Y., M. H. Shih, S. W. Tzeng and C. S. Chang Chien "Experiment of a sliding isolated structure subjected to near-fault ground motion", Proceedings of the 7th Pacific Conference on Earthquake Engineering, February 13-15, Christchurch, New Zealand. 2003.
Lu, L.-Y., Shih, M.-H., Chang Chien, C.-S., and Chang, W.-N. "Seismic performance of sliding isolated structures in near-fault areas", Proceedings of the 7th US National Conference on Earthquake Engineering, July 21-25, Boston, MA, USA. 2002; Session AT-2.
Ming-Hsiang Shih, Chao-Shun Chang, Tsong Yen, (2002) "A Simulation model for Segregation in Fresh Concrete", 6th International Symposium on Utilization of High Strength/High Performance Concrete, June 16-20 2002, Berlin, Germany.
Ming-Hsiang Shih, "Experimental Study of Displacement Dependent Passive and Semi-Active Hydraulic Damper", The Third World Conference of Structural Control, 3WCSC, April 2002, Como, Italy, (NSC-90-2625-Z-327-004).
Wen-Pei Sung, Ming-Hsiang Shih, Cheer Germ Go and Cheng I Lin (2002) "The Evaluative Model for the Extreme Bearing of Anchor Bolt at Base of Steel Structure", The Ninth International Conference on Computing in Civil and Building Engineering, April 2002, Taipei, pp.315-320.
Ming-Hsiang Shih, Chin-Tung Cheng, Han-Yu Tung (2001) "Experimental Validation of Retrofitted and Repaired Beam-Column Connections by using Concrete Jacket", First International Conference on Planning and Design, 3rd-4th November 2001, Tainan, Taiwan, (NSC-89-2218-E-327-005).
Lyan-Ywan Lu, Ming-Hsiang Shih, Chia-Shang Chang Chien and Wan-Ni Chang (2001) "Effect of Near-Fault Earthquakes on Sliding Isolated Structures", First International Conference on Planning and Design, 3rd-4th November 2001, Tainan, Taiwan.
Ming-Hsiang Shih (2000) "Structural Semi-Active Control Device", 12th World Conference on Earthquake Engineering, Auckland, New Zealand, 30 January-4 February 2000, (NSC-89-2625-Z-327-005).

專利發表

Ming-Hsiang Shih (2004) "Accumulated semi-active hydraulic damper",美國發明專利，專利號碼6755113B2，專利有效期限2002年7月30日至2022年7月30日，2004年6月29日核准通過。(NSC-92-2625-Z-327-003)
施明祥 (2001) "振動低減用能動的制御裝置及其方法"，日本發明專利，專利(特許)號碼：3140718號。公告日期：2001年3月5日。專利有效期限2000年12月15日至2017年7月16日。
Ming-Hsiang Shih (1999) "Active control apparatus and method for vibration reduction",美國發明專利，專利號碼5964327，專利有效期限1997年8月至2017年8月，1999年10月12日核准通過。
施明祥(1997) "指向式活動接頭及減振用途"，中華民國發明專利，專利編號第08121號，專利有效期限1997年5月至2016年10月。
盧煉元，施明祥(2002) "結構物隔振系統"，中華民國發明專利，專利編號第146733號，2002年4月(有效期限2001.11.21-2021.4.1)。(NSC-89-2218-E-328-003)
施明祥(2003)"應用於結構物之油壓阻尼消能裝置"，中華民國發明專利，專利編號第166962號，2003年4月1日(有效期限2002.11.01-2021.07.10)。(NSC-91-2625-Z-327-003)
施明祥(2004) "半主動油壓阻尼器"，中華民國發明專利，專利編號第205595號，2004年10月(有效期限2004.6.21-2021.4.18)。(NSC-91-2625-Z-327-003)
施明祥(2004) "半主動蓄壓式油壓阻尼消能裝置"，中華民國發明專利，專利編號第205620號，2004年10月(有效期限2004.6.21-2021.7.10)。(NSC-92-2625-Z-327-003)
盧煉元，施明祥(2003)"軸心對稱型摩擦阻尼器"，中華民國發明專利，專利編號第177519號，專利有效期限2003年5月1日至2022年6月19日。2003年9月3日。
盧煉元，施明祥(2006)"變曲率隔震器"，中華民國發明專利，專利編號第I273158號，專利有效期限2007年2月11日至2025年5月10日。2007年2月11日。
施明祥，童士恒(2009)，"非接觸式物體空間座標量測裝置及方法"，中華民國發明專利，2009年12月11日，申請審查中，申請案號：98142412。
童士恒、施明祥(2010)，"三維座標之量測方法"，中華民國發明專利，2010年1月6日，申請審查中，申請案號：99100135。
施明祥、童士恒(2010)，"非接觸式物體空間座標量測裝置（一）"，中華民國發明專利，2010年3月23日，申請審查中，申請案號：991084857。
宋文沛、蔡在唐、施明祥(2010)，"智慧型環境監控節能系統及其方法"，中華民國發明專利，2010年5月11日，申請審查中，申請案號：099114892。

科技部計畫

施明祥，(2004) “油壓半主動斜撑之研發與足尺模型振動台試驗(III)”，國科會專題計畫研究報告，2004年10月31日。(NSC-92-2625-Z-327-003)
施明祥，(2004)”PC Based油氣壓缸緩衝性能檢驗技術開發”，國科會補助提升產業技術及人才培育研究計畫報告，2004年9月。(NSC92-2622-E-327-003-CC3)
施明祥，(2003) “油壓半主動斜撑之研發與足尺模型振動台試驗”，國科會專題計畫研究報告，2003年10月31日。(NSC-91-2625-Z-327-003)
施明祥，(2002) “蓄壓式油壓半主動阻尼器之試驗與最佳化設計研究”，國科會專題計畫研究報告，2002年10月31日。(NSC-90-2625-Z-327-003)
施明祥，(2000) “指向式活動接頭用於結構減震之行為研究”，國科會專題計畫研究報告，2000年7月31日。

研發作品及相關發表

Yuan-Sen Yang, Chiun-lin Wu , Chin-Hsiung Loh , Chung-Ming Yang, Wen-Hsiang Tu, Ming-Hsiang Shih, Shih-Heng Tung, Philippe Capéran, “Preliminary Study on Image-based Measurement”, 國家地震工程研究中心研究報告，報告編號：NCREE-08-013，2008年4月。(NSC-96-2625-Z-327-002)
施明祥，(2003) “油壓半主動斜撑之研發與足尺模型振動台試驗”，國家地震工程研究中心研究報告，報告編號：NCREE-03-040，2003年12月1日。(NSC-91-2625-Z-327-003)
宋文沛、謝翠玲、陳坤盛、施明祥(2002)” 含氯量檢測方法之效能評估”，國立勤益技術學院教師學術研究群計畫期成果報告，2002年。
施明祥，鍾文鐘 (2001) “蓄壓式油壓半主動減震器在結構抗震之行為研究”，國家地震工程研究中心研究報告，報告編號：NCREE-01-021，2001年8月1日。
施明祥，呂高豐 (2000) “低降伏強度鋼材之制震應用研究”，國立高雄第一科技大學營建工程系，中國鋼鐵股份有限公司合作計畫，2001年3月。
張國鎮等 (1999) “九二一集集大地震全面勘災報告—橋樑震害調查”，國家地震工程研究中心報告，編號：NCREE-99-055，1999年11月。
莫詒隆、鄭錦銅、施明祥、盧煉元、陳建旭 (1999) “橋樑震害”，1999年9月21日台灣中部集集地震初步勘災報告(二)，國家地震工程研究中心報告，編號：NCREE-99-031，1999年11月。
丁育群，施明祥，余志鵬 (1998) “國外建築物震害經驗、教訓及防災應用研究”，內政部建築研究所八十八年度研究成果報告，計畫編號：MOIS 882019，1998年8月。
施明祥(1998) ”Intelligent Building”，第二屆亞太經合會科技展參展主題，台北，1998年1月。

學經歷

學歷

Dr.-Ing., Institute of Mechanics and Constructions, Rheinisch Westfallisch Technische Hochschule Aachen, Germany, 1991-1996
M.S., Civel Engineering, National Taiwan University, 1985-1987
B.S., Civil Engineering, National Chung-Hsing University, 1981-1985

教學課程

Structural Dynamics
Numerical Analysis
Experimental Structural Mechanics
Structural Control

研究與興趣

Earthquake Engineering: Structural Control, Semi-Active Damper and Isolation
Experimental Technique: Dynamic Testing, Application of Digital Image to Measurement, On-Line Monitoring, Experimental Biomechanics
Computers and Programming: Numerical Methods, Finite Element Method, Nonlinear Model, Computer aided Monitoring and Control
Green Engineering: Combination of Solar and Geothermal Energy

榮譽

國內外論文

國內論文發表

”橋梁檢測方法與應用”專書，中國土木水利學會，2010，負責第四章之光學數位影像量測章節，ISBN 978-957-655-
473-5。
- Ming-Hsiang Shih (1996) “Eine aktive Regelung zur Schwingungsreduzierung von Bauwerken unter seiemischen Beanspruchungen”, Dissertation, RWTH Aachen, Germany.
- 施明祥(1987) “自動調整質量與勁度之結構控制機構”，國立台灣大學碩士論文，台北。

國外論文發表

Shih-Heng Tung*, Jui-Chao Kuo*, Ming-Hsiang Shih*, Wen-Pei Sung*, 2012, "Using the simplified 3D DIC method to measure the deformation of 3D surface", Applied Mechanics and Materials, Vol. 121-126, 3945-3949 (EI), NSC-99-2625-M-260-003.
Wen-Pei Sung, Ming-Hsiang Shih*, Darius Bacinskas and Gintaris Kaklauskas, "Experimental Verification and Analysis on Seismic Proof Performance of Velocity and Displacement Dependent Hydraulic Damper (VDHD)", INFORMATION, An International Interdisciplinary Journal (SCI), Accepted.
Ming-Hsiang Shih, Wen-Pei Sung*, 2011, "Development of Semi-Active Hydraulic Damper as Active Interaction Control Device to Withstand Earthquake", Advanced Science Letters (SCI, IF=1.253), Accepted.
Wen-Pei Sung, Ming-Hsiang Shih*, 2011, "Applying Spine-Type Prism to Improve Three Dimensional Dynamic Digital Image Techniques", Advanced Science Letter (SCI, IF=1.253), Accepted.
Ming-Hsiang Shih, Wen-Pei Sung, Shih-Heng Tung and Darius Bacinskas, 2011, "Developing Three-Dimensional Digital Image Correlation Techniques to Detect the surface smoothness of Construction Materials", International Journal of Material and Product Technology(SCI), Vol. 42, Nos. 3/4, pp.234-246, 2011.
Shih-Heng Tung*, Jui-Chao Kuo, Ming-Hsiang Shih, Wen-Pei Sung, 2011, "Application of simplified 3D Digital Image Correlation Method for Sheet Forming of Al Alloy 6061", Advanced Science Letters (SCI)(IF:1.253), Accepted.
L. Y. Lu*; G. L. Lin and M. H. Shih, 2012, "An experimental study on a generalized Maxwell model for nonlinear viscoelastic dampers used in seismic isolation", Engineering Structures, 34 (2012) 111-123, doi:10.1016/j.engstruct. 2011.09.012.
Wen-Pei Sung*, Ting-Yu Chen*, Ming-Hsiang Shih*, 2011, "Evaluation of cooling wall system and phenolic resin as thermal barrier in Buildings", Advanced Material Research (EI, ISSN: 1022-6680), Accepted.
Yu-Kuang Zhao, Ting-Yu Chen, Ming-Hsiang Shih, Wen-Pei Sung*, 2011, "Evaluating the influence of Indoor Temperature on the use of Phenolic Resin as construction material", Advanced Science Letter (SCI, IF=1.253), Accepted.
Wen-Pei Sung, Ting-Yu Chen, Ming-Hsiang Shih and Yu-Kuang Zhao, 2011, "Developing a Practical Geothermal Indoor Heating, Ventilation, & Air Conditioning System", Advanced Science Letters (SCI, IF=1.253), Accepted.
Ming-Hsiang Shih, Wen-Pei Sung, and Ming-Ju Wu, 2011, "Developing Dynamic Digital Image Techniques with Continuous Parameters to Detect Structural Damage", Advanced Science Letter (SCI, IF=1.253), Accepted.
Chung-Huan Sui, Cheer Germ Go, Ming-Hsiang Shih, Wen-Pei Sung, 2011, "Differentia of the Displacement Dependent Semi-Active Hydraulic Damper and Friction Damper in the Energy Dissipation in Structure Vibration", Advanced Science Letter (SCI, IF=1.253), Accepted.
Ming-Hsiang Shih*, Wen-Pei Sung* and S. C. Chen, 2011," Image Correlation Technique to Monitor Dynamic Response of Building under Earthquake Excitation", Advanced Science Letters (SCI, IF=1.253), in press.
Ming-Hsiang Shih, Wen-Pei Sung* and Feng-Jen Tsai, 2011, "Analysis Accuracy of Digital Image Correlation Technique to Monitor Natural Frequency Response of Building under Dynamic Excitation", Applied Mechanics and Materials (EI), Vols. 71-78, pp. 3904-3908, NSC-98-2625-M-260-001.
Wen-Pei Sung*, Ming-Hsiang Shih and Feng-Jen Tsai, 2011, "Development of Digital Image Correlation Technique to Monitor Structural Damage Based on Natural Frequency as Damage Index", Applied Mechanics and Materials (EI), Vols. 71-78, pp. 3899-3903, NSC-98-2625-M-260-001.
Cheer Germ Go*, Sung-Shun Peng, Ming-Hsiang Shih, Tzen-Chin Lee, 2011, "Digital-Image-Correlation to the Evaluation of the Confidence Range of Cleavage Strength of Concrete", Advanced Science Letters (SCI, EI, IF=1.253), 4, 1430-1433 (2011)., NSC-98-2625-M-260-001.
Shih-Heng Tung, Ming_Hsiang Shih*, 2011, "Precision Verification of a Simplified Three-Dimensional DIC Method", Optics and Lasers in Engineering(SCI, EI, IF=1.576), Vol. 49/issue 7 (2011) pp. 937-945, NSC-98-2625-M-260-001.
Wen-Pei Sung*, Ming-Hsiang Shih and Chang-Liang Chen, 2011, "Development of Seismic Isolation Techniques for Elevated Platform of Hi-Tech Factory Building", Advanced Science Letters(SCI, IF=1.253), Vol. 4, 759-763, 2011.
T.Y. Chen*, Wen-Pei Sung*, Ming-Hsiang Shih* and Yu-Kuang Zhao*, 2011, "Evaluating the Effectiveness of Applying Phenolic Resin as Thermal Barrier in Buildings During Summer and Winter", Applied Mechanics and Materials (EI), Vol. 44-47, pp. 2040-2044.
Wen-Pei Sung* , Ming-Hsiang Shih* and Yu-Kuang Zhao*, 2011, "Digital Imagine Correlation (DIC) Method for Detecting Crack Development in Construction Materials Subject to loading",Applied Mechanics and Materials (EI), Vol. 44-47, pp. 2524-2528.
Ming-Hsiang Shih*, Wen-Pei Sung*, Darius Bacinskas*, 2011, "Development of Digital Imagine Correlation (DIC) Method for Three-Dimensional Rugged Surface of Construction Material", Advanced Materials Research (EI), Vols. 243-249 (2011) pp 5907-5910, NSC-99-2625-M-260-003.
Ming-Hsiang Shih and Wen-Pei Sung, 2010, "A Design Concept of Autonomous Controller for Improving Seismic Proof Capability of Semi-Active Control Device", Experimental Techniques(SCI, EI, IF=0.505, Rank=74/122), Vol.34, No.4, pp. 20-26. (NSC-95-2625-Z-327-005).
Ming-Hsiang Shih, Wen-Pei Sung* and Chang-Liang Chen, 2010, "Earthquake Proof Efficacy of Velocity and Displacement Dependent Hydraulic Damper (VDHD) for R.C. Structures", The structural design of tall and special buildings (SCI, EI, IF=0.505, Rank=74/115), Vol. 19, pp. 479-496, 2010. (NSC-95-2625-Z-327-005).
M.-H. Shih , W.-P. Sung* and M.-J. Wu, "Development of Numerical Modeling of Analysis Program for Energy-Dissipating Behavior of Velocity Dependent Hydraulic Damper", Sadhana Academy Proceedings in Engineering Sciences (SCI, IF=0.279, Rank=67/87), Vol. 35, Part 5, October 2010, pp. 631-647 (NSC-95-2625-Z-327-005).
Wen-Pei Sung, Ming-Hsiang Shih* and Yu-Kuang Zhao, 2010, "Energy Dissipation Behaviours and Seismic Reduction Performance of a Proposed Velocity and Displacement Dependent Hydraulic Damper (VDHD)", Journal of Civil Engineering and Management, (SCI, EI, IF=3.711, Rank=3/115), pp. 428-438, Vol.13 No.3, September 2010, ISSN 1392-3730 (NSC-95-2625-Z-327-005).
Ming-Hsiang Shih, Wen-Pei Sung* and Chang-Liang Chen, 2010, "Vibration Control and Shock Absorption Techniques for Hi-Tech Manufacturing Plants", Journal of The Structural Design of Tall and Special Buildings, (SCI, EI, IF=0.261), Published online in Wiley Interscience (www.interscience.wiley.com). DOI: 10.1002/tal.625(NSC-95-2625-Z-327-005).
C.G. Go*, C.H. Sui, Ming-Hsiang Shih and Wen-Pei Sung, 2010, "A Linearization Model for the Displacement Dependent Semi-Active Hydraulic Damper", Journal of Vibration Control (SCI, EI, IF=0.656), Vol. 16, No. 14, pp. 2195-2214, May 1. 2010.
C. H. Sui, C. G. Go*, M. H. Shih and W. P. Sung, 2010, "Validity of the Displacement Dependent Semi-Active Hydraulic Damper Used in a Structure," Journal of Vibration and Control, (SCI, EI, IF=0.656), doi:10.1177/1077546309357693, Nov. 12 2010.
W. T. Lee, Y. J. Chiou*, M. H. Shih, 2010, "Reinforced Concrete Beam-Column Joint Strengthened with Carbon Fiber Reinforced Polymer (CFRP)", Composite Structures (SCI, IF=1.116), 92 (2010) pp. 48-60, doi:10.1016/j.compstruct. 2009.06.011. (NSC-97-2625-M-260-001).
Shih-Heng Tung, Ming-Hsiang Shih and Jui-Chao Kuo*, 2010, "Application of digital image correlation for anisotropic plastic deformation during tension testing", Optics and Lasers in Engineering (SCI, EI, IF=1.153), Vol. 48, May 2010, pp. 636-641. (NSC 97-2625-M-327 -002).
Jui-Chao Kuo, Shih-Heng Tung, Ming-Hsiang Shih and Yan-Yu Lu, 2010, "Characterization of Indentation-Induced Pattern Using Full-Field Strain Measurement", Strain, Vol. 46, 277-282,(SCI/EI) (IF:1.083) (2010/6) (NSC-96-2625- Z-327-002-)
I-Shan Lee, Wen-Pei Sung and Ming-Hsiang Shih 2009, "Dynamic Analyses of High-Speed Railway Bridge Structure under Moving Vehicles", Journal of Dynamical Systems and Geometric Theories (EI), Vol. 7, No.2, pp. 176-201.
Wen-Pei Sung, Ming-Hsiang Shih and Chung-Huan Sui, 2009, "Digital Image Correlation Technique versus Infinitely Small Element Technique for Crack Analysis of Pipe with Crevice", 2009 Sixth International Conference on Fuzzy Systems and Knowledge Discovery (EI), IEEE Computer Society, DOI 10.1109/FSKD.2009.419, August 13-16, 2009, Tianjin, China. (NSC-97- 2626-M-167-001).
Meng-Chia Weng, Shih-Heng Tung and Ming-Hsiang Shih, 2009, "Microscopic characteristics of problematic Tertiary sandstone as revealed by grain-wide local deformation", International Journal of Rock Mechanics and Mining Sciences (SCI, EI, IF=1.031), Vol.46, pp. 1243-1251. doi:10.1016/j.ijrmms.2009.04.005 (NSC-97-2625-M-260-001).
Ming-Hsiang Shih, Wen-Pei Sung* and Ching-Jong Wang, 2009, "A model for signal processing and predictive control of semi-active structural control system", Sadhana Academy Proceedings in Engineering Sciences (SCI, IF=0.287), Vol. 34, Part 3, June 2009, pp. 421-437. (NSC-95-2625-Z-327-005).
W. T. Lee, Y. J. Chiou*, M. H. Shih, 2009, "Digital Image Correlation Method on Analysis of Full Scale Reinforced Concrete Beam-Column Joint Test", Journal of Engineering Mechanics, (SCI, IF=0.787), in review. (NSC-97-2625 -M-260-001).
Shih-Heng Tung, Ming-Hsiang Shih and Wen-Pei Sung*, 2008, "Development of Digital Image Correlation Method to Analyze Crack Variations of Masonry Wall", Sadhana - Academy Proceedings in Engineering Science, Vol. 33, Part 6, 767-779, December 2008. (SCI/EI, IF=0.276)(NSC-96-2625-Z-327-002).
Wen-Pei Sung and Ming-Hsiang Shih, 2008, "Testing and Modeling for Energy Dissipation Behavior of Velocity and Displacement Dependent Hydraulic Damper", Journal of Tsinghua University-Science and Technology (EI), Vol. 13, No. S1, pp. 1-6, October 2008. (NSC-95-2625-Z-327-005).
Jui-Chao Kuo, Delphic Chen, Shih-Heng Tung, Ming-Hsiang Shih, 2008, "Prediction of the orientation spread in an aluminum bicrystal during plane strain compression using a DIC-based Taylor model", Computational Materials Science (SCI, EI, IF=1.549), Vol. 42/4 pp. 564-569, May 2008.
Jui-Chao Kuo, Delphic Chen, Shih-Heng Tung, Ming-Hsiang Shih, 2007, "Misorientation behavior of an aluminum bicrystal with 15.7° symmetric tilt boundary using simple shear", Journal of Material Science (SCI, EI, IF=1.181), Vol. 42, pp.7673-7677, June 2007.
Wen-Pei Sung, Ming-Hsiang Shih and Shih-Heng Tung, 2007, "Mathematical Modelling for Energy Dissipation Behavior of Velocity Dependent Hydraulic Damper with Throttle and Relief Valves", Journal of Civil Engineering Research and Practice, Vol. 4, No. 2, pp. 15-29.
Wen-Pei Sung, Cheer Germ Go and Ming-Hsiang Shih, 2007, "Finite Element Modeling for the Analysis of Cracked Cylindrical Pipes", Journal of Zhejiang University Science, An International Journal (SCI, EI), Vol. 8, No. 9, pp. 1373-1379.
Ming-Hsiang Shih and Wen-Pei Sung, 2007, "Predictive Control and Signal on Noise Reduction for Semi-Active Hydraulic Damper", International Journal of Structural Stability and Dynamics (SCI, EI, IF=0.721), Vol. 7, No. 1, pp. 129-149, March 2007. (NSC-94-2625-Z-327- 005).
Ching-Jong Wang and Ming-Hsiang Shih, 2007, "Performance Study of a bridge involving decks and pounded abutment during a violent earthquake", Engineering Structures (SCI, EI, IF=0.809), Vol.29, No. 5, pp.802-812.
Delphic Chen, Jui-Chao Kuo, Shih-Heng Tung and Ming-Hsiang Shih, 2007, "Characterization of misorientation gradient of an aluminum bicrystal in simple shear", Materials Science & Engineering A, 454-455(SCI, EI, IF=1.806), pp.523-527, April 2007.
Ming-Hsiang Shih, Chang-Liang Chen and Wen-Pei Sung, 2007, "Collapse Analysis of Building Structures under Excitation of Near-Fault Ground Motion with Consideration of Large Deformation and Displacement", The structural design of tall and special buildings (SCI, EI, IF=0.261), Vol. 16, pp. 165-180. (NSC 93-2211-E-167-002).
Ming-Hsiang Shih, Wen-pei Sung and Cheer Germ Go, 2006, "Development and seismic reduction performance of Velocity and Displacement Dependent Hydraulic Damper", Experimental Techniques (SCI, EI, IF=0.322), Vol. 30, No. 3, pp. 41-45, May/June 2006. (NSC-93-2625-Z-327- 003).
Ming-Hsiang Shih, Cheng-I Lin and Wen-Pei Sung, 2006, "Numerical analysis for shock absorption performance of accumulated semi-active hydraulic damper", Journal of Dynamic System and Geometric Theories (EI), Vol. 4, No. 1, pp. 29-45. (NSC-93-2625-Z-327-003)
Jong-Cheng Wu, Ming-Hsiang Shih, Yuh-Yi Lin, Ying-Chang Shen, 2005, "Design guidelines for tuned liquid column damper for structures responding to wind", Engineering Structures (SCI, EI, IF=0.809), Vol. 27, pp. 1983-1905. August 2005.
Wen-Pei Sung, Ming-Hsiang Shih, Cheer Germ Go, I-Fon Huang, 2005, "The Critical Loading for Lateral Buckling of Continuous Welded Rail", Journal of Zhejiang University Science, An International Journal (SCI, EI), Vol. 6A, No. 8, pp878-885. (NSC 93-2211-E-167-002)
Ming-Hsiang Shih, Chang-Liang Chen and Wen-Pei Sung, 2005, "Evaluation Method of Seismic Capability for Moment-Resisting Frames of Reinforced Concrete Structure-Reaction Modeling of Member Displacement", Journal of Dynamic System and Geometric Theories (EI), Vol. 3, No. 2, pp. 153-170, November 2005. (NSC-93-2625-Z-327-003)
Ming-Hsiang Shih and Wen-Pei Sung, "A model for hysteretic behavior of rhombic low yield strength steel added damping and stiffness", Computers & Structures (SCI, EI, IF=0.741), Vol. 83, pp. 895-908, May 2005, (NSC-93-2625-Z-327-003)
Ming-Hsiang Shih, Wen-Pei Sung and Cheer Germ Go, 2005, "The use of low yielding stress in a new energy absorber", Experimental Techniques (SCI, EI, IF=0.322), Vol. 29, No. 2, pp. 20-24. (NSC-93-2625-Z-327-003)
Ming-Hsiang Shih and Wen-Pei Sung, 2005, "The Optimum Structural Control Method-Neutral Equilibrium Mechanism", Journal of Information & Optimization Science (EI), ISSN-0252-2667, Vol. 26, No. 1, pp. 1-23, January 2005, (NSC-92-2625-Z-327-003)
Wen-Pei Sung, Ming-Hsiang Shih and Kuen-Suan Chen, 2005, "Evaluation Method for the Optimum Seismic Energy Dissipation Performance of Displacement Dependent Semi-Active Hydraulic Damper", Journal of Statistics and Management Science (EI, MathSCI), Vol. 8, No. 2, pp. 261-273. 2005/11 (國科會計畫編號：NSC 93-2211-e-167-002)
Wen-Pei Sung, Cheng-I Lin, Ming-Hsiang Shih and Cheer Germ Go, 2005, "Analysis Modeling for Buckling Load of Plate with Vibration Test", Journal of Zhejiang University Science (SCI, EI), Vol. 6A, No. 2, pp. 132-140.
Kuen-Suan Chen, Wen-Pei Sung and Ming-Hsiang Shih, 2005, "Reliable Evaluation Method of Quality Control for Compressive Strength of Concrete", Journal of Zhejiang University Science (SCI, EI), Vol. 6A, No. 8, pp. 836-843.
Ming-Hsiang Shih, Wen-Pei Sung and Kuen-Suan Chen, 2004, "The Optimum Simulation Method for Added Damping and Stiffness Device", Journal of Information & Optimization Science (EI), ISSN-0252-2667, Vol. 25, No. 3, pp.423-439, September 2004 (NSC-92-2625-Z-327-003)
Ming-Hsiang Shih and Wen-Pei Sung, 2004, "The Energy Dissipation Behavior of Displacement Dependent Semi-Active Hydraulic Damper", Journal of Structural Mechanics and Earthquake Engineering (EI), Japan Society of Civil Engineering, Vol. 21, No. 2, pp. 121s-129s, 2004 October, (NSC-92-2625-Z-327-003)
Ming-Hsiang Shih, Wen-Pei Sung and Cheer Germ Go, 2004, "Investigation of Newly Developed Added Damping and Stiffness Device with Low Yield Strength Steel", Journal of Zhejiang University Science (SCI, EI), Vol. 5, No. 3, pp. 326-334. , (NSC-92-2625-Z-327-003)
Wen-Pei Sung, Kuen-Suan Chen and Ming-Hsiang Shih, "Reliability Method for Exacting Device of Test Tool of Chloride Ion in Concrete", Journal of Shandong University-Engineering Science, Vol. 34 Supp., Aug. 2004, Art.-ID:1672-3961(2004) Supp-0131, pp.1-11.
Wen-Pei Sung, Ming-Hsiang Shih and Vernon C. Matzen, 2004, "Time Domain System Identification of Unknown Initial Conditions", Journal of Zhejiang University Science (SCI, EI), Vol. 5, No. 9, pp. 1035-1044.
Wen-Pei Sung, Kuen-Suan Chen and Ming-Hsiang Shih, 2004, "Quantity Analysis for Welding Performance in Manufacturing Process", International Journal of Advanced Manufacturing Technology (SCI, EI, IF=0.352), Vol. 23, No. 1, pp. 707-711. March 2004.
Ming-Hsiang Shih, Wen-Pei Sung and Cheer Germ Go, 2003, "A Design Concept with a Displacement Dependent Semi-Active Hydraulic Damper for Energy Dissipation", Experimental Techniques (SCI, EI, IF=0.322), Vol. 27, No. 6, pp. 53-56. (NSC 91-2625-Z-327-003)
Cheng I Lin, Wen-Pei Sung, Ming-Hsiang Shih and Cheer Germ Go, 2003, "Analysis of Bearing Capability of Anchor Bolt Embedding in Concrete", J. of CCIT (EI), Vol.31, No. 2, pp.49-59.
Wen-Pei Sung, Ming-Hsiang Shih and Kuen-Suan Chen, 2003, "Analytical Method for Promoting Process Capability of Shock Absorption Steel", Journal of Zhejiang University Science (SCI, EI), Vol. 4, No. 4, pp. 388-392, (NSC-91-2625-Z-327-003)
Ming-Hsiang Shih, Wen-Pei Sung and Cheer Germ Go, 2002, "Development of Accumulated Semi-Active Hydraulic Damper", Experimental Techniques (SCI, EI, IF=0.322), Vol. 26, No. 5, pp. 29-32. , (NSC-89-2625-Z-327-005)
Wen-Pei Sung, Ming-Hsiang Shih and Cheer Germ Go, 2002, "Analysis Modeling for the Sequence of Local Buckling of Crack Thin Plate Under Tension", J. of CCIT (EI), Vol. 30, No. 2, pp. 61-72.
施明祥，童士恒，宋文沛，郭瑞昭，2008，「數位影像相關係數法在橋梁動靜態變位監測之應用」，土木水利，第35?，第5期，第64頁至71頁，2008年10月。
童士恒，施明祥，郭瑞昭，翁孟嘉，2008，「數位影像量測技術於土木工程監檢測之應用」，地工技術，第26?，第117期，第81頁至第90頁，2008年9月。
宋文沛，施明祥，郭其珍，林政毅，2005，「含泄流閥之黏滯油壓阻尼器的力學行?研究」，興大工程學刊，第16卷，第2期，第131頁至第140頁。
盧煉元，施明祥，曾旭玟，吳政彥，「滑動隔震支承之研發與其受近斷層震波行為之實驗探討」，結構工程，第20?，第3期，第29-59頁，2005年9月。
施明祥，宋文沛，2004，「新型結構控制機構之應用研究－臨界平衡控制機構」，中國科技發展精典文庫第三輯，北京中國科技報研究會出版 (NSC-92-2625-Z-327-003)。
宋文沛，施明祥，隋忠寰，郭其珍，2004，「半主動位移相依阻尼器消能行為之數值分析模式」，土木工程技術，預計刊登於第8卷，第1期，第1頁至第17頁 (NSC-92-2625-Z-327-003)。
施明祥，宋文沛，陳亮宏，郭其珍，2004，「蓄壓式半主動油壓阻尼器消能行為之數值分析模式」，土木工程技術，第8卷，第5期，第1頁至第14頁(NSC-92-2625-Z-327-003)。
施明祥，宋文沛，2003，「降伏加勁阻尼裝置之實驗與理論分析研究」，技術學刊，第18卷，第3期，第295頁至第302頁，(NSC-91-2625-Z-327-003)。
施明祥，宋文沛，鍾文鐘，李一聖(2003)"蓄壓式半主動油阻尼器之理論分析研究"，結構工程，第十八卷第一期，37-49頁，2003年3月，(NSC-91-2625-Z-327-003)。
施明祥，宋文沛，鍾文鐘(2003)"位移相依半主動油壓阻尼器之消能行為研究"，結構工程，第十八卷第一期，51-62頁，2003年3月，(NSC-91-2625-Z-327-003)。
盧煉元，施明祥，張婉妮，2003，"近斷層震波對滑動式隔震結構之影響評估"，結構工程，第十八卷第四期，23-48頁，2003年12月。
施明祥，宋文沛(2002)"新型耐震鋼板簡介"，現代營建，274期，73-80頁，2002年10月，(NSC-90-2625-Z-327-004)。
施明祥，宋文沛，鍾文鐘 (2002) "位移相依半主動油壓阻尼器之設計與行為研究"，結構工程，第十七?第一期，81-90頁，2002年3月，(NSC-90-2625-Z-327-004)。(獲推選為2002年結構工程論著獎)
宋文沛，施明祥，陳坤盛 (2002) "混凝土抗壓強度品質之評估方法研究"，技術學刊，第十七卷第二期，203-209頁。
施明祥，宋文沛，郭其珍，呂高豐 (2001) "低降伏菱形鋼板之耐震性能研究"，土木工程技術，第4卷，第4期，41-50頁，(NSC-89-2625-Z-327-005)。
施明祥，宋文沛，郭其珍 (2001) "低降伏強度鋼材之性能驗證"，興大工程學刊，第12卷，第1期，65-70頁，(NSC-89-2625-Z-327-005)。
施明祥(2001) "液流阻尼器-高樓耐震新利器"，營建知訊，台灣營建研究院， 2001年8月，20-26頁，(NSC-89-2625-Z-327-005)。
Wen-Pei Sung, Ming-Hsiang Shih (1999) "System for Identification Using Initial Conditions as Active Parameters", 勤益學報第十七期，365-377。

國內外研討會

國內研討會

施明祥、童士恒、宋文沛、郭其珍，"數位影像相關方法在地震防災及結構監測之應用"，中華民國第十屆結構工程研討會，論文編號209，桃園楊梅，2010年12月1-3日。
- 宋文沛、施明祥、隋忠寰，"數位影像關係法分析含裂維生管受內水壓力之應變分析"，中華民國第十屆結構工程研討會，論文編號203，桃園楊梅，2010年12月1-3日。
- 童士恒、施明?、吳宛錚，" ?位影像相關係?法於微觀鑽孔法應用之研究"，中華民國第十屆結構工程研討會，論文編號210，桃園楊梅，2010年12月1-3日。
- 郭其珍、施明祥、李增欽，"數位影像相關係數法於混凝土張力開裂之監測"，中華民國第十屆結構工程研討會，論文編號209，桃園楊梅，2010年12月1-3日。
- 童士恒、施明祥、葉明龍、俞肇球、江政賢、陳慶頤、黃渝紋，2009年12月11-12日，"數位影像相關係數法於生醫工程應用之研究"，2009生物醫學工程國際研討會暨中華民國生物醫學工程學會年度學術研討會，台北。
- 施明祥、童士恒、宋文沛、李威璁，"鋼筋混凝土樑柱接頭破壞行為觀測之研究"，九十八年電子計算機在土木水利工程應用研討會，143-148頁，新竹，2009年9月3-4日。
- 施明祥、童士恒、郭瑞昭、吳宛錚，" 液態介質於降低反光對微觀數位影像相關係數法影響之探討"，九十八年電子計算機在土木水利工程應用研討會，715-720頁，新竹，2009年9月3-4日。
- 翁孟嘉、童士恒、施明祥、俞肇球、黃耀增，"?位影像相關係?法於岩石微觀變形之應用"，2008岩盤工程研討會，台北，2008年10月30-31日。
- 施明祥、童士恒、郭瑞昭，"影像分析在結構變形監檢測的應用"，非破壞性監、檢測與工程管理研討會，高雄，民國97年10月25日。
- 童士恒、施明祥、楊元森、李宛瑾，"Application of the Digital Image Correlation Method to the Column Deformation Measurement in a Push Over Test in Guan-Miao Elementary School", The 9th National Conference on Structure Engineering, Paper No. M-275, pp. 1-8, Kaohsiung, Taiwan. , 22-24 Aug. 2008.
- 宋文沛、施明祥，" Development of Digital Imagine Correlation Method for Investigating Crack Variation of Brick Wall and Reinforced Concrete Beam Subject to loading", The 9th National Conference on Structure Engineering, Paper No. M-275, pp. 1-8, Kaohsiung, Taiwan. , 22-24 Aug. 2008.
- 宋文沛、施明祥、陳墇?，" Study on the Energy-Dissipating Behavior of Velocity and Displacement Dependent Semi-Active Hydraulic Damper", The 9th National Conference on Structure Engineering, Paper No. M-275, pp. 1-8, Kaohsiung, Taiwan. , 22-24 Aug. 2008.
- 施明祥，童士恒，楊元森，"現地試驗影像量測"，校舍耐震補強現地實驗成果研討會論文集，國家地震工程研究中心NCREE-08-001，民國97年1月25日， pp. 125-141。
- Y.Y. Lu, J.C. Kuo, S.H. Tung, M.H. Shih, "On anisotropy of indentation induced piling-up by using optical microstrain measurement",中華民國材料科學學會年會2006, 台南, 台灣.
- Y.Y. Liao, C.T. Hsueh, J.C. Kuo, S.H. Tung, M.H. Shih, "On The Influence of Friction Using Simulation and Experiment Approach",中華民國材料科學學會年會2006, 台南, 台灣.
- 施明祥、宋文沛、童士恒、郭瑞昭、楊婕，"?位影像相關係?法於非均質材?應變分析及?縫觀測之應用"，中華民國第八屆結構工程研討會，Paper No. M-008，Sun Moon Lake, Taiwan, R. O. C., 1-3 Sept. 2006。
- 童士恒、郭瑞昭、施明祥、蔡源?，"校正由影像扭曲所導致?位影像關係法分析誤差之研究"，中華民國第八屆結構工程研討會，Paper No. L-017，Sun Moon Lake, Taiwan, R. O. C., 1-3 Sept. 2006。
- 施明祥，宋文沛，郭其珍，"減震系統之訊號處理與預測控制"，中華民國第八屆結構工程研討會，Paper No. N-011，Sun Moon Lake, Taiwan, R. O. C., 1-3 Sept. 2006。
- 施明祥、宋文沛、黃文光，"速度與位移相依油壓阻尼器之消能行為研究"，中華民國第八屆結構工程研討會，Paper No. N-017，Sun Moon Lake, Taiwan, R. O. C., 1-3 Sept. 2006。
- 隋忠寰、郭其珍、施明祥、宋文沛，"位移相依半主動油壓阻尼器之動態機制與消能?為"，中華民國第八屆結構工程研討會，Paper No. H-019，Sun Moon Lake, Taiwan, R. O. C., 1-3 Sept. 2006。
- 陳墇?、施明祥，" 鋼筋混凝土構件被動圍束效應之?別與評估" ，中華民國第八屆結構工程研討會，Paper No. O-019，Sun Moon Lake, Taiwan, R. O. C., 1-3 Sept. 2006。
- 陳墇?、施明祥，"應用尋優演算法?別鋼筋混凝土系統之遲滯模型??" ，中華民國第八屆結構工程研討會，Paper No. O-020，Sun Moon Lake, Taiwan, R. O. C., 1-3 Sept. 2006。
- ??元、施明祥、吳政彥、許朝畯、?奕?，" 錐形摩擦單擺支承之實驗研究"，中華民國第八屆結構工程研討會，Paper No. H-004，Sun Moon Lake, Taiwan, R. O. C., 1-3 Sept. 2006。
- 施明祥、宋文沛、童士恒、郭瑞昭、楊婕，" ?位影像相關法在?縫觀測之應用"，第13屆非破壞檢測技術研討會，中壢，2006年4月28-29日。
- 郭瑞昭，童士恒，施明祥，陳志慶(2005)" ?位光學測?於固體材?變形分析之應用"，九十四?電子計算機於土木水?應用研討會，2005年8月，台南。
- 施明祥(2005)"油壓半主動斜撐之研發與試驗驗證"，高科大工學院2005年教師研發成果研討會，p.101-p.106，2005年3月，高雄。
- 施明祥(2004) "油壓半主動斜撐之研發與足尺模型振動台試驗(III)"，國科會93年度防救災專案計畫成果研討會。
- 施明祥，宋文沛(2004)"蓄壓式半主動油壓阻尼器之行為研究" ，第七屆結構工程研討會，桃園，(NSC-92-2625-Z-327-003)。
- 施明祥，宋文沛，隋忠寰(2004)"位移相依半主動油壓阻尼器之消能行為研究"，第七屆結構工程研討會，桃園，(NSC-92-2625-Z-327-003)。
- 施明祥，林政毅，宋文沛(2004)"含洩流閥之黏滯油壓阻尼器的力學行為研究"，第七屆結構工程研討會，桃園，(NSC-92-2625-Z-327-003)。
- 施明祥，宋文沛(2004)"低降伏加勁阻尼裝置之研發"，第七屆結構工程研討會，桃園，(NSC-92-2625-Z-327-003)。
- 陳墇?，施明祥(2004)"近斷層區域之結構動態P-Δ效應"，第七屆結構工程研討會，桃園，(NSC-92-2625-Z-327-003)。
- 宋文沛，施明祥，郭其珍(2004)"長重鐵軌側向挫屈臨界載重之數值分析" ，第七屆結構工程研討會，桃園。
- 宋文沛，施明祥，陳亮宏，郭其珍(2004)"蓄壓式半主動油壓阻尼器消能行為之數值模擬模式" ，第七屆結構工程研討會，桃園，(NSC-92-2625-Z-327-003)。
- ??元，施明祥，吳政彥(2004)"變曲??動隔震支承之遲滯?為??與實驗研究" ，第七屆結構工程研討會，桃園。
- 陳坤盛，施明祥，宋文沛(2004)"降伏加勁阻尼裝置理論分析之統計驗證研究" ，第七屆結構工程研討會，桃園，(NSC-92-2625-Z-327-003)。
- Kuen-Suan Chen, Wen-Pei Sung, Ming-Hsiang Shih (2004), "Quality Evaluation Model for Multi-Quality Property of Semi-active Hydraulic Damper", 第七屆結構工程研討會，桃園，(NSC-92-2625-Z-327-003)。
- 隋忠寰，宋文沛，施明祥，郭其珍，2003，「半主動位移相依阻尼器之數值理論模擬」，中華民國第27屆年力學學會年會研討會，台南，(NSC-91-2625-Z-327-003)。
- 施明祥，宋文沛，郭其珍(2002)"臨界平衡控制機構之研究"，第六屆結構工程研討會，墾丁，(NSC-90-2625-Z-327-004)。
- 童士恒，施明祥(2002)"高速鐵路橋樑跨距對地表微振波傳的影響之研究"，第六屆結構工程研討會，墾丁。
- 鄭錦銅、赫偉業、施明祥(2002)"搖擺橋柱隔震法之擺動分析與試驗"，第六屆結構工程研討會，墾丁。
- 宋文沛、陳坤盛、施明祥、郭其珍(2002)"鋼鐵材料之製程能力分析"，第六屆結構工程研討會，墾丁。
- 施明祥，鍾文鐘(2001) "半主動油壓阻尼器的研發與應用"，建築隔減震技術研討會，正修技術學院，(NSC-89-2625-Z-327-005)。
- 施明祥，許慶鏞(2000) "半主動及被動減震控制之勁度效應"，第五屆結構工程研討會，溪頭，(NSC-90-2625-Z-327-004)。
- 施明祥，鄭錦銅，董瀚友(2001) "RC結構樑柱接頭補強成效驗證"，應用於土木結構之耐震材料研發八十九學年度期末研究成果研討會，145-164頁，(NSC-89-2218-E-327-005)。
- 盧煉元，施明祥，張婉妮(2001) "近斷層地區重要建物之隔震防災策略研究(I)"，防災重要建物之耐震對策八十九學年度期末研究成果研討會，260-283頁。
- 施明祥，鄭錦銅，陳益源，董瀚友(2001) "RC結構樑柱接頭補強成效驗證"，應用於土木結構之耐震材料研發八十九學年度期中研究成果研討會，123-139頁，(NSC-89-2218-E-327-005)。
- 盧煉元，施明祥，張婉妮(2001) "近斷層地區重要建物之隔震防災策略研究(I)"，防災重要建物之耐震對策八十九學年度期中研究成果研討會，170-185頁。
- 鄭錦銅，施明祥，盧煉元，陳建治，莫詒隆(1999) "集集大震之橋樑破壞研討"，1999集集大地震災害調查研討會，1999年11月5-6日，台南，B23-B46頁。
- 丁育群，施明祥，余志鵬(1999) "國外建築物震害經驗、教訓及防災應用研究"，內政部建築研究所八十八年度研究成果發表會，第六冊，台北。
- 施明祥(1998) "主動接頭在高樓結構減震之用途"，第四屆結構工程研討會，台北。

國外研討會

Ming-Hsiang, Shih, Jui-Ling Peng, Yeong-Bin Yang, Shyh-Rong Kuo, "Applying Digital Image Correlation Method to Experiment of Geometric Nonlinear Behavior", 3rd International Symposium on Computational Mechanics (ISCM III) and 2nd Symposium on Computational Structural Engineering (CSE II), 5-7 December, 2011, Taipei, Taiwan[invited talk].
M.H. Shih, S.H. Tung and W.P. Sung, 2011, "Innovative Three Dimensional Digital Image Correlation Technology for Dynamical Measurement", Proceedings of the Thirteenth International Conference on Civil, Structural and Environmental Engineering Computing, ISBN 978-1-905088-46-1, Paper 114, 6-8 September 2011, Chania, Crete, Greece.
S.H. Tung, M.H. Shih and J.C. Kuo, 2011, "Application of the Digital Image Correlation Method to Micro Hole Drilling", Proceedings of the Thirteenth International Conference on Civil, Structural and Environmental Engineering Computing, ISBN 978-1-905088-46-1, Paper 113, 6-8 September 2011, Chania, Crete, Greece.
S.H. Tung and M.H. Shih, 2010, "Application of the Digital Image Correlation Method to the Identification of Landslides", Proceedings of the Seventh International Conference on Engineering Computational Technology, ISBN 978-1-905088-40-9, Paper 138, 14-17 September 2010, Valencia, Spain.
M.H. Shih, W.P. Sung and S.H. Tung, 2010, "Using the Digital Image Correlation Technique to Measure the Mode Shape of a Cantilever Beam", Proceedings of the Tenth International Conference on Computational Structures Technology, ISBN 978-1-905088-37-9, Paper 65, 14-17 September 2010, Valencia, Spain.
M. H. Shih, W. P. Sung, 2010, "Study on the Research and Development of Interaction Structural Control Device", 5th World Conference on Structural Control and Monitoring, Paper 227, July 12-14 2010, Tokyo, Japan.
W. P. Sung, M. H. Shih, H. Huang and F. J. Tsai, "Development of Digital Image Correlation Method to Detect the Real-Time Dynamic Response of Building under Excitation", 5th World Conference on Structural Control and Monitoring, Paper 138, July 12-14 2010, Tokyo, Japan.
Yeong-Bin Yang, Shyh-Rong Kuo, Jui-Ling Peng, and Ming-Hsiang Shih , 2010, "Applications of Rigid Body and Force Equilibrium Concepts in Deriving the Geometric Nonlinear Strain Energy for Plates", The Russia - Austria Joint Workshop on Advanced Dynamics and Model Based Control of Structures and Machines, April 26 - 28 2010, Linz, Austria
M. H. Shih, W. P. Sung and J. L. Chen, 2010, "Seismic behavior of retaining wall-backfill systems with vegetation", Proceedings of the 5th International Conference on Responsive Manufacturing-Green Manufacturing ICRM2010 (EI), pp.482-487, 11-13 January 2010, Ningbo, China.
M.H. Shih, H. Huang, C. F. Wu, S.H. Tung, 2010, "The quality assurance method for newly developed light brick", Proceedings of the 5th International Conference on Responsive Manufacturing-Green Manufacturing ICRM2010 (EI), pp.300-305, 11-13 January 2010, Ningbo, China.
S.H. Tung, M.H. Shih, W. P. Sung, J. G. Shyu, 2010, "Testing method for porosity foam heat insulation construction material", Proceedings of the 5th International Conference on Responsive Manufacturing-Green Manufacturing ICRM2010 (EI), pp.171-177, 11-13 January 2010, Ningbo, China.
Ming-Hsiang Shih, Wen-Pei Sung, 2009, "Energy Dissipation Behavior of an Autonomous Controller for Semi-Active Control Device", Proceedings of the ASME 2009 Pressure Vessels and Piping Division Conference, PVP2009, Paper No. 77133, July 26-30, 2009, Prague, Czech Republic.
S.H. Tung, M.H. Shih and J.C. Kuo, 2009, "Evaluation of the Joint Roughness Coefficient using the Digital Image Correlation Method", Proceedings of the Twelfth International Conference on Civil, Structural and Environmental Engineering Computing, 2009, doi:, Paper 229, pp.1-12, September 1-4, Funchal, Madeira, Portugal.
Wen-Pei Sung and Ming-Hsiang Shih, 2008, "Seismic Reduction Performance of Predictive Control Velocity Predictor for Semi-Active Hydraulic Damper", Proceedings of the 14th World Conference on Earthquake Engineering, Paper No. 14-0008, October 12-17, 2008, Beijing, China.
Wen-Pei Sung, Ming-Hsiang Shih and Chiang-Liang Chen, 2008, "Seismic Resistant Capability Analysis for Moment-Resisting Frames of Reinforced Concrete Structure with Consideration of Member Displacement Reaction", Eleventh East Asia-Pacific Conference on Structural Engineering & Construction (EASEC-11), Paper No. 40, November 19-21, Taipei, Taiwan.
S.-H. Tung, M.-H. Shih and Y.-S. Yang, 2008, "Application of the Digital-Image-Correlation Technique to Measure the Deformation of a Seismic Retrofitted Column for a Two-Storey Building",Proceedings of the Ninth International Conference on Computational Structures Technology, 2008, doi:10.4203/ccp.88.289, Paper 289, pp.1-12, September 2-5, Athens Greece.
M.C. Weng, S.H. Tung, M.H. Shih, C.C. Yu and Y.T. Huang, 2008, "Characterizing the Deformation Behavior of Weak Sandstone from Micro-Vision", Proceedings of the Sixth International Conference on Engineering Computational Technology, 2008, Paper 165, pp.1-12, September 2-5, Athens Greece.
Sung, Wen-Pei, Shih, Ming-Hsiang, 2008, "Testing and Modeling for Energy Dissipation Behavior of Velocity and Displacement Dependent Hydraulic Damper", 12th International Conference on Computing in Civil and Building Engineering & 2008 International Conference on Information Technology in Constructio, Beijing, China from October 16 to 18.
Wen-Pei Sung, Ming-Hsiang Shih, Chung-Huan Sui, "Study on the Equivalent Damping Ratio and Energy Reduction Performance of Displacement Dependent Semi-active Hydraulic Damper", 8thPacific Conference on Earthquake Engineering 2007, Paper No. 103, 5-7 December, Sigapore.
Ming-Hsiang Shih, Wen-Pei Sung, Shih-Heng Tung and Jui-Chao Kuo, "Application of Digital Image Correlation Method for Experimental Study of Shear Hysteresis Behavior of Welded Joint", Structural Engineering World Conference 2007, Paper No. 22.2, 2-7 November, Bangalore, India.(Abstract)
Wen-Pei Sung, Ming-Hsiang Shih, Shih-Heng Tung, "A Mathematical Model for Mechanical Behavior of Viscous Hydraulic Damper with Throttle and Relief Valves", Structural Engineering World Conference 2007, Paper No. 22.2, 2-7 November, Bangalore, India.
W.P. Sung, M.H. Shih and S. P. Hsu, 2007, "The Energy Dissipation Performance of Displacement Dependent Semi-Active Hydraulic Damper", World Forum on Smart Structures and Technology-2007, Paper No. 8, 26-27 May, Nanking, China.
Wen-Pei Sung, Ming-Hsiang Shih and Shou-Ping Hsu, 2007, "The Energy Dissipation Performance of Displacement Dependent Semi-Active Hydraulic Damper", World Forum on Smart Materials and Smart Structures Technology, Chongqing & Nanjing, China, Paper No. 8.
Ming-Hsiang Shih and Wen-Pei Sung, 2006, "Development and Testing of Autonomous Controller for Semi-Active Control Device", The 1st European Conference on Earthquake Engineering and Seismology, Geneva, Switzerland, Paper No. 697.
Wen-Pei Sung and Ming-Hsiang Shih, 2006, "Seismic Reduction Performance of Predictive Control Velocity Predictor for Semi-Active Hydraulic Damper", The 1st European Conference on Earthquake Engineering and Seismology, Geneva, Switzerland, Paper No. 699.
Ming-Hsiang Shih and Wen-Pei Sung, 2006, "Noise Reduction of Signal Process for Predictive Control of Semi-Active Hydraulic Damper", The 4th World Conference on Structural Control and Monitoring, San Diego, U.S.A., Paper No. 17.
Wen-Pei Sung, Ming-Hsiang Shih and Shou-Ping Hsu, 2006, "Mathematical Modeling and Seismic Proof Performance of Velocity and Displacement Dependent Hydraulic Damper", The 4thWorld Conference on Structural Control and Monitoring, San Diego, U.S.A., Paper No. 16.
M.H. Shih, S.H. Tung, J.C. Kuo and W.P. Sung, 2006, "The Application of a Digital Image Correlation Method for Crack Observation", Proceedings of the Eighth International Conference on Computational Structures Technology, ISBN-10 1-905088-08-6, Civil-Comp Press, doi:10.4203/ccp.83.86, Sep. 12-15, 2006, Las Palmas, Spain.
S.H. Tung, J.C. Kuo and M.H. Shih, 2006, "Calibration of the Image Distortion Induced Error for a Plane Strain Field Measured Using Digital Image Correlation Techniques", Proceedings of the Fifth International Conference on Engineering Computational Technology, ISBN-10 1-905088-11-6, Civil-Comp Press, doi:10.4203/ccp.84.138, Sep. 12-15, 2006, Las Palmas, Spain.
Shih-Heng Tung, Jui-Chao Kuo and Ming-Hsiang Shih, 2005, "Strain Distribution Analysis Using Digital-Image-Correlation Techniques", The Eighteenth KKCNN Symposium on Civil Engineering, ISBN 986-80222-3-1, Paper No. NTU29, Dec. 18-21, 2005, Kaohsiung.
M.-H. Shih and W.-P. Sung, 2005, "Signal Processing and Predictive Control of a Semi-Active Structural Control System", Proceedings of the Tenth International Conference on Civil, Structural and Environmental Engineering Computing, ISBN 1-905088-00-0, doi:10.4203/ccp.81.207, pp. 1-12, Aug. 30-Sep.2 2005, Rome. NSC94-2625-Z-327-005.
W.-P. Sung and M.-H. Shih, 2005. "Analysis and Modelling of the Energy Dissipation Behaviour of Velocity and Displacement Dependent Hydraulic Dampers", Proceedings of the Tenth International Conference on Civil, Structural and Environmental Engineering Computing, ISBN 1-905088-00-0, doi:10.4203/ ccp.81.208, pp.1-9, Aug. 30-Sep.2 2005 Rome. NSC94-2625-Z-327-005.
S.H. Tung, C.C. Yu, W.H. Lee and M.H. Shih, "The Isolation Efficiency of the Dual-Trench System in a Three Dimensional Wave Propagation Problem", Proceedings of the Tenth International Conference on Civil, Structural and Environmental Engineering Computing, ISBN 1-905088-00-0, doi:10.4203/ccp.81.210, pp1-10, Aug. 30-Sep.2 2005, Rome.
Ming-Hsiang Shih, Wen-Pei Sung, Cheer Germ Go, "Development of Accumulated Semi-Active Hydraulic Dampers", 13th World Conference on Earthquake Engineering (Oral), Paper No. 1963,August 1 - 6, 2004, Vancouver, B.C., Canada, (NSC-93-2625-Z-327-003).
Wen-Pei Sung, Ming-Hsiang Shih, Kuen-Suan Chen and Cheer Germ Go, "Neutral Equilibrium Mechanism for Structural Control", 13th World Conference on Earthquake Engineering, Paper No. 3236, August 1 - 6, 2004, Vancouver, B.C., Canada, (NSC-92-2625-Z-327-003).
L.-Y. Lu, M.-H. Shih, C.-Y. Wu, C.-S. Chang-Chien," NEAR-FAULT SEISMIC ISOLATION USING SLIDING BEARINGS WITH VARIABLE CURVATURES", 13th World Conference on Earthquake Engineering (Oral), Paper No. 3264, August 1 - 6, 2004, Vancouver, B.C., Canada.
Wen-Pei Sung, Kuen-Suan Chen and Ming-Hsiang Shih, 2004, "Reliability Method for Exacting Device of Test Tool of Chloride Ion in Concrete", The 11th International Manufacturing Conference in China (IMCC 2004)- Integration of management and Technology-, Sundong, China.
W. P. Sung, C. G. Go and M. H. Shih, "Using Super Element for the Solution of Cracked Shell at Cylindrical Pressure Vessels", International Symposium on New Perspectives for Shell and Spatial Structures, October 22-26, 2003, Taipei, Taiwan. paper No. 164.
Lu, L. Y., M. H. Shih, S. W. Tzeng and C. S. Chang Chien "Experiment of a sliding isolated structure subjected to near-fault ground motion", Proceedings of the 7th Pacific Conference on Earthquake Engineering, February 13-15, Christchurch, New Zealand. 2003.
Lu, L.-Y., Shih, M.-H., Chang Chien, C.-S., and Chang, W.-N. "Seismic performance of sliding isolated structures in near-fault areas", Proceedings of the 7th US National Conference on Earthquake Engineering, July 21-25, Boston, MA, USA. 2002; Session AT-2.
Ming-Hsiang Shih, Chao-Shun Chang, Tsong Yen, (2002) "A Simulation model for Segregation in Fresh Concrete", 6th International Symposium on Utilization of High Strength/High Performance Concrete, June 16-20 2002, Berlin, Germany.
Ming-Hsiang Shih, "Experimental Study of Displacement Dependent Passive and Semi-Active Hydraulic Damper", The Third World Conference of Structural Control, 3WCSC, April 2002, Como, Italy, (NSC-90-2625-Z-327-004).
Wen-Pei Sung, Ming-Hsiang Shih, Cheer Germ Go and Cheng I Lin (2002) "The Evaluative Model for the Extreme Bearing of Anchor Bolt at Base of Steel Structure", The Ninth International Conference on Computing in Civil and Building Engineering, April 2002, Taipei, pp.315-320.
Ming-Hsiang Shih, Chin-Tung Cheng, Han-Yu Tung (2001) "Experimental Validation of Retrofitted and Repaired Beam-Column Connections by using Concrete Jacket", First International Conference on Planning and Design, 3rd-4th November 2001, Tainan, Taiwan, (NSC-89-2218-E-327-005).
Lyan-Ywan Lu, Ming-Hsiang Shih, Chia-Shang Chang Chien and Wan-Ni Chang (2001) "Effect of Near-Fault Earthquakes on Sliding Isolated Structures", First International Conference on Planning and Design, 3rd-4th November 2001, Tainan, Taiwan.
Ming-Hsiang Shih (2000) "Structural Semi-Active Control Device", 12th World Conference on Earthquake Engineering, Auckland, New Zealand, 30 January-4 February 2000, (NSC-89-2625-Z-327-005).

專利與技術移轉

專利發表

Ming-Hsiang Shih (2004) "Accumulated semi-active hydraulic damper",美國發明專利，專利號碼6755113B2，專利有效期限2002年7月30日至2022年7月30日，2004年6月29日核准通過。(NSC-92-2625-Z-327-003)
施明祥 (2001) "振動低減用能動的制御裝置及其方法"，日本發明專利，專利(特許)號碼：3140718號。公告日期：2001年3月5日。專利有效期限2000年12月15日至2017年7月16日。
Ming-Hsiang Shih (1999) "Active control apparatus and method for vibration reduction",美國發明專利，專利號碼5964327，專利有效期限1997年8月至2017年8月，1999年10月12日核准通過。
施明祥(1997) "指向式活動接頭及減振用途"，中華民國發明專利，專利編號第08121號，專利有效期限1997年5月至2016年10月。
盧煉元，施明祥(2002) "結構物隔振系統"，中華民國發明專利，專利編號第146733號，2002年4月(有效期限2001.11.21-2021.4.1)。(NSC-89-2218-E-328-003)
施明祥(2003)"應用於結構物之油壓阻尼消能裝置"，中華民國發明專利，專利編號第166962號，2003年4月1日(有效期限2002.11.01-2021.07.10)。(NSC-91-2625-Z-327-003)
施明祥(2004) "半主動油壓阻尼器"，中華民國發明專利，專利編號第205595號，2004年10月(有效期限2004.6.21-2021.4.18)。(NSC-91-2625-Z-327-003)
施明祥(2004) "半主動蓄壓式油壓阻尼消能裝置"，中華民國發明專利，專利編號第205620號，2004年10月(有效期限2004.6.21-2021.7.10)。(NSC-92-2625-Z-327-003)
盧煉元，施明祥(2003)"軸心對稱型摩擦阻尼器"，中華民國發明專利，專利編號第177519號，專利有效期限2003年5月1日至2022年6月19日。2003年9月3日。
盧煉元，施明祥(2006)"變曲率隔震器"，中華民國發明專利，專利編號第I273158號，專利有效期限2007年2月11日至2025年5月10日。2007年2月11日。
施明祥，童士恒(2009)，"非接觸式物體空間座標量測裝置及方法"，中華民國發明專利，2009年12月11日，申請審查中，申請案號：98142412。
童士恒、施明祥(2010)，"三維座標之量測方法"，中華民國發明專利，2010年1月6日，申請審查中，申請案號：99100135。
施明祥、童士恒(2010)，"非接觸式物體空間座標量測裝置（一）"，中華民國發明專利，2010年3月23日，申請審查中，申請案號：991084857。
宋文沛、蔡在唐、施明祥(2010)，"智慧型環境監控節能系統及其方法"，中華民國發明專利，2010年5月11日，申請審查中，申請案號：099114892。

執行計畫

科技部計畫

施明祥，(2004) “油壓半主動斜撑之研發與足尺模型振動台試驗(III)”，國科會專題計畫研究報告，2004年10月31日。(NSC-92-2625-Z-327-003)
施明祥，(2004)”PC Based油氣壓缸緩衝性能檢驗技術開發”，國科會補助提升產業技術及人才培育研究計畫報告，2004年9月。(NSC92-2622-E-327-003-CC3)
施明祥，(2003) “油壓半主動斜撑之研發與足尺模型振動台試驗”，國科會專題計畫研究報告，2003年10月31日。(NSC-91-2625-Z-327-003)
施明祥，(2002) “蓄壓式油壓半主動阻尼器之試驗與最佳化設計研究”，國科會專題計畫研究報告，2002年10月31日。(NSC-90-2625-Z-327-003)
施明祥，(2000) “指向式活動接頭用於結構減震之行為研究”，國科會專題計畫研究報告，2000年7月31日。

研發作品及相關發表

Yuan-Sen Yang, Chiun-lin Wu , Chin-Hsiung Loh , Chung-Ming Yang, Wen-Hsiang Tu, Ming-Hsiang Shih, Shih-Heng Tung, Philippe Capéran, “Preliminary Study on Image-based Measurement”, 國家地震工程研究中心研究報告，報告編號：NCREE-08-013，2008年4月。(NSC-96-2625-Z-327-002)
施明祥，(2003) “油壓半主動斜撑之研發與足尺模型振動台試驗”，國家地震工程研究中心研究報告，報告編號：NCREE-03-040，2003年12月1日。(NSC-91-2625-Z-327-003)
宋文沛、謝翠玲、陳坤盛、施明祥(2002)” 含氯量檢測方法之效能評估”，國立勤益技術學院教師學術研究群計畫期成果報告，2002年。
施明祥，鍾文鐘 (2001) “蓄壓式油壓半主動減震器在結構抗震之行為研究”，國家地震工程研究中心研究報告，報告編號：NCREE-01-021，2001年8月1日。
施明祥，呂高豐 (2000) “低降伏強度鋼材之制震應用研究”，國立高雄第一科技大學營建工程系，中國鋼鐵股份有限公司合作計畫，2001年3月。
張國鎮等 (1999) “九二一集集大地震全面勘災報告—橋樑震害調查”，國家地震工程研究中心報告，編號：NCREE-99-055，1999年11月。
莫詒隆、鄭錦銅、施明祥、盧煉元、陳建旭 (1999) “橋樑震害”，1999年9月21日台灣中部集集地震初步勘災報告(二)，國家地震工程研究中心報告，編號：NCREE-99-031，1999年11月。
丁育群，施明祥，余志鵬 (1998) “國外建築物震害經驗、教訓及防災應用研究”，內政部建築研究所八十八年度研究成果報告，計畫編號：MOIS 882019，1998年8月。
施明祥(1998) ”Intelligent Building”，第二屆亞太經合會科技展參展主題，台北，1998年1月。

回上層

地址 545南投縣埔里鎮大學路302號
電話 049-2910960 #4121、4122
傳真 049-2918679
信箱 wenman@ncnu.edu.tw whhsaio@mail.ncnu.edu.tw

土木工程學系粉絲專頁

採用全球最先進SSL 256bit 傳輸加密機制

建議使用Chrome、Firefox、Safari最新版本瀏覽

會員登入

施明祥

學歷

國內論文發表

國外論文發表

國內研討會

國外研討會

專利發表

科技部計畫

研發作品及相關發表

學歷

國內論文發表

國外論文發表

國內研討會

國外研討會

專利發表

科技部計畫

研發作品及相關發表