姓名:郭昌宏 (Chang-Hung Kuo)
職稱:土木系教授
分機:4954
信箱:chkuo@ncnu.edu.tw
領域專長:
  • Computational Mechanics, Tribology, Micromechanics, Metal Fatigue, Computer Modeling of Materials, Dynamics of Structures
學經歷

學歷

  • Ph.D., Northwestern University
  • M.S., National Taiwan University
  • B.S., National Cheng Kung University

經歷

  • Professor, National Chi Nan University, 2014-present
  • Associate Professor, National Chi Nan University, 1998-2014
  • Chairman, Dept. of Applied Materials and Optoelectronic Engineering, 2009-2010
  • Library Director, National Chi Nan University, 2000-2004
  • Member of Technical Staff, Rockwell Science Center (Teledyne Scientific & Imaging, LLC), 1997-1998
  • Research Associate, Center for Engineering Tribology, Northwestern University 1993-1997
教學課程
  • Statics
  • Dynamics
  • Elasticity
  • Advanced Engineering Mathematics (I)
  • Finite Element Method
  • Advanced Finite Element
  • Computation Materials Science
  • Engineering Mathematics (I),(II)
  • Numerical Analysis
  • Dynamics of Structures
  • Mechanical Behavior of Materials
  • Micromechanics
研究與興趣
  • Computational Mechanics
  • Tribology
  • Micromechanics
  • Metal Fatigue
  • Computer Modeling of Materials
  • Dynamics of Structures
榮譽
  • Marquis Who'sWho in the World, 2010-2021
  • Marquis Who'sWho in Science and Engineering, 2011-2014
  • Marquis Who'sWho in Asia, 2012
  • 國立暨南國際大學教學貢獻獎,101學年度
  • 傑出教學助理指導教師 (靜力學)101學年度
國內外期刊
  • (1) M. Wu, J. W. Rudnicki, C. H. Kuo and L. M. Keer, "Surface Deformation and Energy Release Rates for Constant Stress Drop Slip Zones in an Elastic Half-Space," Journal of Geophysical Research, 16,509-16,524, Vol. 96, 1991.
  • (2) W. Lin, C. H. Kuo and L. M. Keer, "Analysis of a Transversely Isotropic Halfspace under Normal and Tangential Loadings," ASME Journal of Tribology, 335-338, Vol. 113, 1991.
  • (3) L.M. Keer and C. H. Kuo, "Cracking in a Loaded, Brittle Elastic Half-Space," International Journal of Solids and Structures, 1819-1826, Vol. 29, 1992.
  • (4) C.H. Kuo and L. M. Keer, "Contact Stress Analysis of a Layered Transversely Isotropic Half-Space," ASME Journal of Tribology, 253-262, Vol. 114, 1992.
  • (5) C.H. Kuo, L. M. Keer and R. K. Steele, "Simulation of the Vertical Split Head Failure in Rails," International Journal of Solids and Structures, 2177-2197, Vol. 30, 1993.
  • (6) C.H. Kuo and L. M. Keer, "Contact Stress and Fracture Analysis of Articular Cartilage," Biomedical Engineering, 53-59, Vol. 5, 1993.
  • (7) C.H. Kuo, L. M. Keer and R. D. Cordes,"A Note on Line Spring Solutions for a Part-Through Crack," International Journal of Fracture, 1191-195, Vol.72, 1995.
  • (8) C.H. Kuo and L. M. Keer, "Three-Dimensional Analysis of Cracking in a Multi-Layered Composite," ASME Journal of Applied Mechanics, 273-281, Vol. 62,1995.
  • (9) C.H. Kuo, L. M. Keer and M. P. Bujold, "Effects of Multiple Cracking on Crack Growth and Coalescence in Contact Fatigue," ASME Journal of Tribology,385-390, Vol. 119, 1997.
  • (10) C.H. Kuo, "Mechanics of Contact Fatigue," 專題報導,中華民國力學學會會訊,第九十九期,中華民國九十一年八月
  • (11) C.H. Kuo, "Stress Disturbances Caused by the Inhomogeneity in an Elastic Half-Space Subjected to Contact Loading," International Journal of Solids and Structures, 860-873, Vol. 44, 2007. (2007 I.F=1.569, Mechanics Rank=15/112)
  • (12) C.H. Kuo, "Contact Stress Analysis of an Elastic Half-Plane Containing Multiple Inclusions," International Journal of Solids and Structures 45 4562-4573, 2008. (2008 I.F=1.809, Mechancis Rank=20/112)
  • (13) C.H. Kuo, "Boundary element methods for contact analysis,"(invited), Encyclopedia of Tribology, Springer, 2013.
  • (14) C.H. Kuo, "Elastic field due to an edge dislocation in a multilayered composite," International Journal of Solids and Structures 51, 1421-1433, 2014. (SCI, 20/137, Mechanics)
  • (15) C.H. Kuo, "Elastic-Plastic Analysis of Fretting Contacts," Key Engineering Materials, 248-252, Vol. 642, 2015.
  • (16) S. Kotšmíd, C-H Kuo, P. Beno, “Determination of Critical Load in a Nonuniform Circular Steel Column under the Eccentric Axial Load,” Mathematical Problems in Engineering, 1, 1-9, 2016 (EI).
  • (17) S. Kotšmíd, C-H Kuo, P. Beňo, “Buckling loads for steel tube with flattened ends,” Archive of Applied Mechanics, 87(6), 949–960, 2017 (SCI, 80/135, Mechanics).
  • (18) C-H Kuo*, S-F Lim, H-R Ho, “Cyclic Deformation Caused by Repeatedly Contact Loading. Applied Mechanics and Materials,” 883, 8-15, 2018. (EI).
  • (19) C-H Kuo, “Elasto-Plastic Contact Stress Analysis of Hardened Elements under Repeated Contact Loading,” Key Engineering Materials, 823, 91-96, 2019 (EI).
國內外研討會
(1) "Interpretation of Coseismic Surface Deformation Data Using Three Dimensional Crack (Stress Drop) Models," NSF/USGS Workshop on Crustal Deformation Measurement and Earthquake Mechanics, March 18-22 1990, Monterey, CA.
(2) "Modeling of Coseismic Surface Deformation Using Non-Kinematic Approach," the 85th Annual Meeting of the Seismological Society of America, May 2-4 1990, Santa Cruzm, CA.(3) "Cracking in a Loaded, Brittle Elastic Half-Space," George Hermann Anniversary Symposium, March 1991, San Diego.
(4) "Contact Stress Analysis of a Layered Transversely Isotropic Half-Space," 1991 ASME/STLE Tribology Conference.
(5) "Three-Dimensional Analysis of Cracking in a Multi-Layered Composite," 1993 ASME-EMD Meeting.
(6) "Effect of Mulctiple Cracking on Crack Growth and Coalescence in Contact Fatigue," 1996 ASME/STLE Tribology Conference.
(7) "Recent Development on Contact Faitgue Life Prediction in Gears," GM Gear Center Workshop, October 1996, Detroit, MI.
(8) C.-H. Kuo, "A Boundary Element Method for the Three-Dimensional Fracture Analysis of Multiple Cracking in Structural Materials," 八十八年「電子計算機於土木水利工程應用」研討會
(9) C.-H. Kuo, "Three-Dimensional Contact Stress Analysis of Engineered Surfaces with Measured Roughness, 九十二年中國機械工程學會第二十屆全國學術研討會
(10) 陳世育, 郭昌宏, "複合材料應用於鋼筋混凝土結構補強之有限元素分析," 九十四年電子計算機於土木水利工程應用研討會
(11) 許志義, 郭昌宏, "薄膜壓痕試驗之有限元素分析," 九十四年第二屆磨潤暨材料科技研討會(12) 許志義, 郭昌宏, "應用三維有限元素模型分析薄膜壓痕量測試驗", 九十四年中國機械工程學會第二十二屆全國學術研討會
(13) 張譯文, 郭昌宏, "單晶體銅奈米壓痕試驗之分子動力模擬", 九十五年中國機械工程學會第二十三屆全國學術研討會
(14) 林秀芬, 郭昌宏, "非線性硬化材料之彈塑性滾滑動接觸分析", 九十七年中國機械工程學會第二十五屆全國學術研討會
(15) 林敬淶, 郭昌宏, "分子動力模擬探討壓痕深度與探針尖端半徑對於奈米壓痕試驗結果之影響", 九十七年中國機械工程學會第二十五屆全國學術研討會
(16) 郭昌宏,“邊界元素法應用於接觸問題分析,” The Third Workshop on Boundary Element Methods, Integral Equations and Related Topics in Taiwan, 2012
(17) C.-H. Kuo,“Analytical Modeling of Reciprocating Contacts due to Fretting,”1st Conference on Tribology Technology of Taiwan and Competition on Surface Engineering Application, 2013.
(18) 林祺惠、何泓儒、郭昌宏*、林仁輝, “水平軸風力發電機塔柱結構振動分析,” 一百零二年中國機械工程學會第三十屆全國學術研討會
(19) 何泓儒、林祺惠、郭昌宏*、林仁輝, “風力發電機葉片應力分析,” 一百零二年中國機械工程學會第三十屆全國學術研討會
(20) 陳品良、郭昌宏*, “線接觸彈液動潤滑分析,” 一百零二年中國機械工程學會第三十屆全國學術研討會
(21) C.-H. Kuo, “Elastic-Plastic Analysis of Fretting Contacts,” 2014 International Conference on Engineering Tribology Technology.

 
專利與技術移轉

專書

C.-H. Kuo, Tribology-Lubricants and Lubrication . InTech. Oct, 2011
執行計畫

科技部

  • 含異質內含物和多孔隙結構鋼材之彈塑性分析含異質內含物和多孔隙結構鋼材之彈塑性分析 (20210801-20220731)
  • 表面硬化滾滑動接觸元件抗磨耗性質之解析模型 (20170801-20190131)
  • 表面硬化鋼材在反覆滾滑動接觸下之彈塑性變形研究 (20160801-20180131)
  • 以微觀機械模型硏究尺度效應對於微動疲勞破壞之影響 (20150801-20170131)
  • 微動引起之接觸疲勞破壞研究(20140801-20160131)
  • 滾滑動接觸元件因微動引起之循環塑性變形和磨耗機制研究 (20130801-20141031)
  • 機械關鍵零組件表面工程基礎研究中心(深耕工業基礎技術專案計畫) (20130101-20140731)
  • 表面鍍膜在循環接觸應力作用下之抗磨耗機制研究 (20110801-20130131)
  • 碳鋼在反覆滾滑動接觸下之循環塑性變形研究 (20090801-20110131)
  • 多尺度模擬應用於薄膜材料機械及磨潤性質之研究 (20060801-20070731)
  • 類鑽碳薄膜材料磨潤性質和破壞機制之解析模型建立 (20030801-20040731)
  • 實際工程表面之三維微接觸應力及疲勞破壞分析(2/2) (20020801-20030731)
  • 實際工程表面之三維微接觸應力及疲勞破壞分析(1/2) (20010801-20020731)
  • 國立暨南國際大學科技學院大樓結構數值模型之建立和耐震評估 (20000801-20010731)
  • 接觸疲勞解析模型之建立與電腦模擬 (19990801-20000731)

大專生研究計畫

  • 張琪棉:風力發電機結構分析設計研究(20150701-20160228)
  • 紀佩瑩:無元素葛勒金法應用於二維接觸應力分析 (20130701-20140228)